ping is perhaps the most commonly used tool to troubleshoot a network. Ping (Packet Internet Groper) is included with most operating systems. It is invoked using a ping command and uses ICMP (Internet Control Message Protocol) to reports errors and provides information related to IP packet processing. Ping works by sending an ICMP echo request message to the specified IP address. If the computer with the destination IP address is reachable, it responds with an ICMP echo reply message.
A ping command usually outputs some other information about a network performance, e.g. a round-trip time, a time to send an ICMP request packetand receive an ICMP reply packet.
Here is an output of the ping command from Windows 7:
In the example above we have pinged the ip address 10.10.100.1. By default, ping on Windows sends four ICMP request packets. As you can see from the output above, the host with the IP address of 10.10.100.1 is reachable and has replied with four ICMP reply packets. You can also see that the remote host has replied within 1 ms (time<1ms), which indicates that the network is not congested.
Prerequisites for 200-301
200-301 is a single exam, consisting of about 120 questions. It covers a wide range of topics, such as routing and switching, security, wireless networking, and even some programming concepts. As with other Cisco certifications, you can take it at any of the Pearson VUE certification centers.
The recommended training program that can be taken at a Cisco academy is called Implementing and Administering Cisco Solutions (CCNA). The successful completion of a training course will get you a training badge.
Full Version 200-301 Dumps