The second part of an IPv6 unicast or anycast address is typically a 64-bit interface identifier used to identify a host’s network interface. A 64-bit interface ID is created by inserting the hex value of FFFE in the middle of the MAC address of the network card. Also, the 7th Bit in the first byte is flipped to a binary 1 (if the 7th bit is set to 0 it means that the MAC address is a burned-in MAC address). When this is done, the interface ID is commonly called the modified extended unique identifier 64 (EUI-64).
For example, if the MAC address of a nework card is 00:BB:CC:DD:11:22 the interface ID would be 02BBCCFFFEDD1122.
Why is that so?
Well, first we need to flip the seventh bit from 0 to 1. MAC addresses are in hex format. The binary format of the MAC address looks like this:
hex 00BBCCDD1122 binary 0000 0000 1011 1011 1100 1100 1101 1101 0001 0001 0010 0010
We need to flip the seventh bit:
binary 0000 0010 1011 1011 1100 1100 1101 1101 0001 0001 0010 0010
Now we have this address in hex:
Next we need to insert FFFE in the middle of the address listed above:
So, the interface ID is now 02BB:CCFF:FEDD:1122.
Another example, this time with the MAC address of 00000C432A35.
1. Convert to binary and flip the seventh bit to one:
binary: 0000 0010 0000 0000 0000 1100 0100 0011 0010 1010 0011 0101
2. Convert back to hex:
3. Insert FFFE in the middle:
interface ID: 02000CFFFE432A35
Prerequisites for 200-301
200-301 is a single exam, consisting of about 120 questions. It covers a wide range of topics, such as routing and switching, security, wireless networking, and even some programming concepts. As with other Cisco certifications, you can take it at any of the Pearson VUE certification centers.
The recommended training program that can be taken at a Cisco academy is called Implementing and Administering Cisco Solutions (CCNA). The successful completion of a training course will get you a training badge.
Full Version 200-301 Dumps