How to add, install or import IOS in GNS3

This tutorial explains how install and import Cisco IOS in GNS3 step by step with practical examples. In order to use any Cisco device such as router and switch in GNS3, we must have to install that device’s IOS first. Learn how to install, configure and use Cisco IOS in GNS3 in detail.

Since Cisco IOSs are protected by copyright laws, GNS3 does not include any Cisco IOS in default installation. It only provides a platform to use Cisco IOS but it does not provide any Cisco IOS itself. It means, in order to use any Cisco device in GNS3, we must have to install that device’s IOS first. This tutorial explains how to install necessary Cisco device’s IOS in GNS3.

Downloading Cisco IOS

In order to install Cisco device in GNS3, we must have to obtain its IOS file. There are several sources from where we can obtain this file. We can get it from real Cisco device, or can download it from Cisco’s official site (it requires a valid Cisco account and license agreement) or can download it from educational sites. If none of these work for you, simply search following term in Google.

intitle:index.of cisco ios parent directory bin

You may check this site It contains the largest collection of Cisco IOSs.
I found this site through Google search. It may be may not be working at this moment.

Regardless how you obtained the IOS file, installation process is same for all.

Installing and importing Cisco IOS in GNS3

For this tutorial I assume that GNS3 is installed and configured.

To learn how to install and configure GNS3, check this tutorial

How to install GNS3 step by step explained

It explains how to install and configure GNS3 step by step with practical example.

Download the IOS file

download ios file

Open GNS3 and click Edit file menu and from sub-menu click Preferences

file menu

Navigate to Dynamips -> IOS routers option in left pane and click New button in right pane

ios router options

Select New Image option and click Browse button. Now select the downloaded IOS image file

new image

By default IOS files are compressed. GNS3 supports both compressed and decompressed format.

Keep the compressed format

ios compressed format

Verify that correct file is selected and click Next button

ios file selected

If selected IOS belongs to an outdated device, wizard may display a warning message.

In real life, using an outdated device is not recommended. Since GNS3 uses a real Cisco IOS, it also follows the
same recommendation and warns us about the outdated IOS. If we are going to use this device only for CCNA exam preparation or to get
some hands on experience on Cisco IOS, we can ignore this message.

ignore warning

Now wizard extracts the hardware information (platform and chassis number) form selected IOS file and lists it in next screen along with an automatically populated device name.

If extracted information does not match with device, select the correct platform and chassis number from drop down. If require, you may also adjust the device name.

Verify / adjust the information and Click Next button to continue

platform and chasis information

Next screen allows us set the RAM size for this device. By default wizard automatically allocates the minimum recommended memory (RAM) for device.
But if require, we can adjust it to match with our specific requirement.

ram size

If selected IOS belongs to a modular device, next screen allows us to install the interfaces in available slots.

serial interface slot

Select appropriate interfaces and click Next button.

serial interface selected

Just like interfaces slots, if selected IOS belongs to a device which has WIC modules,
next screen allows to install the WIC interface in WIC slots.

wic slot

Select the desire WIC interface and click Next button

wic interface

Next screen allows us to put a limit on CPU usage by this IOS. We should always specify this value. This value prevents a faulty or buggy IOS from consuming entire CPU cycles. Once this value is configured, GNS3 does not allow IOS from consuming CPU beyond this limit.

Click Idle-PC finder button and use the suggested value in this field.

ideal-pc finder

Click Finish button to close the wizard

ideal pc value

Managing IOS files

All installed IOS files can be managed from the same option.

All installed files are listed in the right pane of Dynamips -> IOS routers option. Select the file which you want to manage.
Once IOS file is selected, control options will be highlighted in the bottom section. There are four control options

New: –
this option is used to install the new IOS file. If no installed IOS file is selected, only this option will be highlighted.

Decompress: –
This option allows us to decompress the selected IOS file.

Edit: –
This option allows us to update the configuration values which we used while installing it. All configuration values are listed in right section of the pane.

Delete: –
This option allows us to delete the selected IOS file.

ios management options

How to use installed device from IOS

Once IOS file is successfully installed in GNS3, belonging device will be available in Installed appliances box.
For example, in this tutorial we installed an IOS file which belongs to 2600 series router.
To use it, click Routers icon from left pane and select Installed appliances from drop down box.
It will list all installed devices. To use the device, drag it in workspace.

import installed ios

That’s all for this tutorial. For any feedback, suggestion or comment about this tutorial, simply mail me. If you like this tutorial, share it with your friends.

Prerequisites for 200-301

200-301 is a single exam, consisting of about 120 questions. It covers a wide range of topics, such as routing and switching, security, wireless networking, and even some programming concepts. As with other Cisco certifications, you can take it at any of the Pearson VUE certification centers.

The recommended training program that can be taken at a Cisco academy is called Implementing and Administering Cisco Solutions (CCNA). The successful completion of a training course will get you a training badge.

Full Version 200-301 Dumps

Try 200-301 Dumps Demo