Ensurepass

CCIE Routing and Switching Written Exam v5.1

 

QUESTION 651

DRAG DROP

Drag and drop the protocol on the left to the corresponding administrative distance on the right.

 

clip_image001

 

Correct Answer:

clip_image002

 

 

QUESTION 652

Which object tracking function tracks the combined states of multiple objects?

 

A.

application

B.

interface

C.

stub-object

D.

list

 

Correct Answer: D

 

 

QUESTION 653

In which two situations is an EIGRP hello packet sent as unicast? (Choose two.)

 

A.

during neighbor discovery

B.

when link costs change

C.

when the neighbor command is used

D.

when an ACK is sent

 

Correct Answer: CD

 

 

QUESTION 654

Which statement about BGP and diverse path advertisement is true?

 

A.

The BGP best-path selection must be disabled.

B.

The BGP best-path selection algorithm has been changed to always ignore the IGP metric.

C.

The BGP best-path selection algorithm has been changed so that two BGP paths can be flagged as best in the BGP table.

D.

The BGP best-path selection algorithm has not been changed.

E.

The BGP best-path selection is disabled for BGP routes for which the feature is enabled.

 

Correct Answer: D

Explanation:

The BGP Diverse Path Using a Diverse-Path Route Reflector feature allows BGP to distribute an alternative path other than the best path between BGP speakers when route reflectors are deployed. This additional path is added to the best-path, and the best path algorithm still remains unchanged.

 

 

QUESTION 655

DRAG DROP

Drag each traceroute text character on the left to its meaning on the right.

 

clip_image003

 

Correct Answer:

clip_image004

 

 

 

 

 

 

 

 

QUESTION 656

Refer to the exhibit. Which two statements are correct, when the QoS configuration is applied in an outbound direction on a 10- Mb/s interface? (Choose two.)

 

clip_image006

 

A.

When reaching 10 Mb/s of input rate, the video class will be policed to 200 kb/s.

B.

The class FTP is allowed to reach more than 1 Mb/s in the event of congestion.

C.

IP precedence 1 traffic is affected by a drop probability.

D.

Video traffic above 200 kb/s is allowed to pass when the total interface output rate does not reach 10 Mb/s.

E.

Video traffic above 200 kb/s is allowed to pass when congestion is present.

 

Correct Answer: BD

 

 

QUESTION 657

Refer to the exhibit. A user with IP address 10.10.10.200 fails to telnet to a switch with IP address 10.10.20.2. What is the cause of the issue?

 

clip_image008

A.

The switch is not configured with a default gateway.

B.

The HTTP server is not enabled on the switch.

C.

STP is blocking the connection from switch to router.

D.

IP routing is enabled on the switch, but no route pointing back to the client is configured.

E.

The switch is configured with an IP address from the wrong subnet.

 

Correct Answer: D

 

 

QUESTION 658

Refer to the exhibit. Router RTB is performing one-way redistribution from RIP to OSPF. Which outgoing interface will router RTD choose for packets to the 192.168.0.0/24 network, and why?

 

clip_image010

 

A.

Fa0/1, because OSPF is a link-state routing protocol

B.

Fa0/0, because RIP is a distance vector protocol

C.

Fa0/0, because RIP has a higher administrative distance

D.

Fa0/0, because OSPF has a lower administrative distance

E.

Fa0/1, because OSPF has a lower administrative distance

F.

Fa0/1, because RIP has a lower administrative distance

 

Correct Answer: D

 

 

 

 

 

 

 

 

 

 

 

 

 

QUESTION 659

Refer to the exhibit. You have performed multiple changes to your OSPF configuration. After these changes, you receive a lot of calls from users in OSPF area 2 complaining about application performance issues when they access servers connected to area 3. When you check the routing table of router RTC, you notice that packets to network 10.3.3.0/24 are sent out via the slower path out of the Fa0/0 interface. What can you do to solve this issue?

 

clip_image012

 

A.

Change the OSPF configuration in OSPF area 1 to OSPF area 0

B.

Change the OSPF configuration in OSPF area 0 to OSPF area 1

C.

Change the OSPF configuration in OSPF area 2 to OSPF area 3

D.

Change the OSPF configuration in OSPF area 3 to OSPF area 1

 

Correct Answer: A

 

 

QUESTION 660

Refer to the exhibit. You get reports that Windows users cannot log in anymore when the main MPLS link is down. The message that users receive is, “There are currently no login servers available to service the login request.” However, if you modify the MTU of the client machine to 1294, the user can log in. What would be a reliable fix for this issue?

 

clip_image014

 

A.

add “ip tcp mss-adjust 1254” to se1/0/0

B.

add “ip tcp mss-adjust 1254” to se1/0/0 and fa1/0

C.

force Windows to use TCP for Kerberos

D.

add “ip icmp error-send” to se1/0/0

 

Correct Answer: C

 

Free VCE & PDF File for Cisco 400-101 Practice Test

Instant Access to Free VCE Files: CCNA | CCNP | CCIE …
Instant Access to Free PDF Files: CCNA | CCNP | CCIE …