Ensurepass

QUESTION 1

A server runs Windows Server 2008. The Terminal Services role is installed on the server.

 

You deploy a new application on the server. The application creates files that have an extension of .xyz.

 

You need to ensure that users can launch the remote application from their computers by double-clicking a file that has the .xyz extension.

 

What should you do?

 

A.

Configure the Remote Desktop Connection Client on the users’ computers to point to the server.

B.

Configure the application as a published application by using a Remote Desktop Program file.

C.

Configure the application as a published application by using a Windows Installer package file.

D.

Configure the application as a published application by using a Terminal Server Web Access Web site.

 

Correct Answer: C

Explanation:

Launching Apps from the Desktop For users who want to double-click documents to launch the application, terminal services now provides the ability to “install” the remote application’s link to the desktop. This process effectively wraps the RemoteApp’s RDP file into a Windows Installer package–an MSI file–that is later installed to desktops in the environment. At the same time, the installed MSI can modify the file extension associations on the desktop to reroute a double-clicked file to its associated RemoteApp on the terminal server. Figure 3 shows how the file extension associations have been modified on a client system after a Word RemoteApp is installed. Now, double-clicking any of the common Word file extensions will launch Word via the Remote Desktop Connection.

image004

 

Figure 3 File extension associations that have been altered to launch the Remote Desktop Connection

To create a Windows Installer package out of an existing RemoteApp, first navigate to the TS RemoteApp Manager. Right-click the RemoteApp of interest and select Create Windows Installer Package. By default, all created Windows Installer packages are stored in the location C:\Program Files\Packaged Programs, but this location can be changed from within the RemoteApp Wizard. Also configurable within the wizard are the name and port for the server that will host the RemoteApp, as well as server authentication, certificate settings, and TS Gateway settings. Settings that relate to the application’s location after installation to a candidate desktop are shown in Figure 4. As you can see, it is possible to create a shortcut on the desktop as well as to a location within the Start menu folder. The most important checkbox on this screen is at the very bottom. It’s the checkbox for Take over client settings, and it re-associates any file extension associations for the RemoteApp from the local desktop to the terminal server. This checkbox must be selected if you want users to be able to double-click documents to launch their TS-hosted application. Click Next and Finish to complete the wizard. Please Note: -Since Windows2008R2 Terminal Services (TS) is now rebranded to Remote Desktop Services (RDS)- Source: http://technet.microsoft.com/en-us/query/dd314392

 

 

QUESTION 2

You have a server that runs Windows Server 2008 R2. The server has the RD Gateway role service installed.

 

You need to provide a security group access to the RD Gateway server.

 

What should you do?

 

A.

Add the security group to the Remote Desktop Users group.

B.

Add the security group to the TS Web Access Computers group.

C.

Create and configure a Remote Desktop Resource Authorization Policy.

D.

Create and configure a Remote Desktop Connection Authorization Policy.

 

Correct Answer: D

Explanation:

Remote Desktop connection authorization policies (RD CAPs) allow you to specify who can connect to an RD Gateway server.

Source: http://technet.microsoft.com/en-us/library/cc753324.aspx

 

 

QUESTION 3

Your company uses Public folders and Web Distributed Authoring and Versioning. The company asks you to install Microsoft Windows SharePoint Services (WSS) as a server in a new server farm. You plan to install WSS on a server that runs Windows Server 2008 R2.

 

You start the Configuration Wizard to begin the installation. You receive an error message as shown in the exhibit.

 

image005

 

You need to configure WSS to start SharePoint Services 3.0 SP 2 Central Administration.

 

What should you do?

 

A.

Install the Windows Internal Database.

B.

Install a Microsoft SQL Server 2005 server.

C.

Install the Active Directory Rights Management Services role.

D.

Install the Active Directory Lightweight Directory Services role.

 

Correct Answer: B

Explanation:

To resolve this problem, you need to install Microsoft SQL Server 2005 server on the farm. This error message occurs when either the SQL Server does not exist or the SQL Server services id stopped.

 

The server farm account is used to access your configuration database. It also acts as the application pool identity for the SharePoint Central Administration application pool, and it is the account under which the Windows SharePoint Services Timer service runs. The SharePoint Products and Technologies Configuration Wizard adds this account to the SQL Server Logins, the SQL Server Database Creator server role, and the SQL Server Security Administrators server role. If SQL Server is not available then the above mentioned error message will appear.

 

Reference: Configuration Wizard – Failed to Connect

http://blogs.msdn.com/neilth/archive/2008/04/25/failed-to-connect-or-database-name-does-

not-exist.aspx

 

 

QUESTION 4

You manage a member server that runs Windows Server 2008 R2. The server runs the Remote Desktop Gateway (RD Gateway) role service.

 

You need to find out whether a user named User1 has ever connected to his office workstation through the RD Gateway server.

 

What should you do?

 

A.

View the events in the Monitoring folder from the RD Gateway Manager console.

B.

View the Event Viewer Security log.

C.

View the Event Viewer Application log.

D.

View the Event Viewer Terminal Services-Gateway log.

 

Correct Answer: D

Explanation:

By using TS Gateway Manager, you can specify the types of events that you want to monitor, such as unsuccessful or successful connection attempts to internal network computers through a TS Gateway server.

When these events occur, you can monitor the corresponding events by using Windows Event Viewer. TS

Gateway server events are stored in Event Viewer under Application and Services Logs\Microsoft\Windows

\Terminal Services-Gateway\.

Source: http://technet.microsoft.com/en-us/library/cc730618(WS.10).aspx

 

 

QUESTION 5

Your company has an Active Directory domain. All the servers in the company run either Windows Server 2008 R2 or Windows Server 2003. A Windows Server 2003 server named Server1 runs Microsoft SQL Server 2005 SP2 and Microsoft Windows SharePoint Services

(WSS) 2.0.

 

The company plans to migrate to WSS 3.0 SP2 on a Windows Server 2008 R2 server named Server2.

 

You need to migrate the configuration and content from Server1 to Server2.

 

What should you do?

 

A.

Back up the SharePoint configuration and content from Server1. Install WSS 3.0 SP2 on Server2. Restore the backup from Server1 to Server2.

B.

Upgrade Server1 to Windows Server 2008 R2. Back up the SharePoint configuration and content from Server1. Install WSS 3.0 SP2 on Server2. Restore the backup from Server1 to Server2.

C.

Back up the SQL Server 2005 configuration and the WSS 2.0 databases from Server1. Install SQL Server 2005 on Server2. Restore the SQL Server 2005 backup from Server1 to Server2.

D.

Back up the WSS 2.0 configuration and content from Server1. Install WSS 2.0 on Server2. Restore the backup from Server1 to Server2. Perform an in-place upgrade of WSS 2.0 to WSS 3.0 SP2 on Server2.

 

Correct Answer: D

Explanation:

To migrate to SharePoint Services (WSS) 3.0. from Server1 to Server2 with all the configuration and content, you need to install WSS 2.0 on Server2. Back up the WSS 2.0 configuration and content from Server1 and restore the backup from Server1 to Server2. Perform an in-place upgrade of WSS 2.0 to WSS 3.0 on Server2.

 

When you run an in-place upgrade, all content and configuration data is upgraded in-place, at one time. When you start the in-place upgrade process, the Web server and Web sites remain offline until the upgrade has been installed. In-place upgrades are best for a stand- alone server and small installations as in this case

 

Reference: Install and configure Office SharePoint Server for an in-place upgrade

http://technet.microsoft.com/en-us/library/cc263212(TechNet.10).aspx

 

Reference: Determine upgrade approach (Office SharePoint Server)

http://technet.microsoft.com/en-us/library/cc263447(TechNet.10).aspx

 

 

QUESTION 6

Your company has an Active Directory domain. You have a server named KMS1 that runs Windows Server 2008 R2. You install and configure Key Management Service (KMS) on KMS1. You plan to deploy Windows Server 2008 R2 on 10 new servers. You install the first two servers. The servers fail to activate by using KMS1.

 

You need to activate the new servers by using the KMS server.

 

What should you do first?

 

A.

Complete the installation of the remaining eight servers.

B.

Configure Windows Management Instrumentation (WMI) exceptions in Windows Firewall on the new servers.

C.

Install Volume Activation Management Tool (VAMT) on the KMS server and configure Multiple Activation Key (MAK) Proxy Activation.

D.

Install Volume Activation Management Tool (VAMT) on the KMS server and configure Multiple Activation Key (MAK) Independent Activation.

 

Correct Answer: A

Explanation:

Key Management Service

With KMS, IT pros can complete activations on their local network, eliminating the need for individual computers to connect to Microsoft for product activation. KMS is a lightweight service that does not require a dedicated system and can easily be co-hosted on a system that provides other services. By default, volume editions of Windows 7 and Windows Server 2008 R2 connect to a system that hosts the KMS service to request activation. No action is required from the user.

KMS requires a minimum number of computers (physical or virtual machines) in a network environment.

The organization must have at least five computers to activate Windows Server 2008 R2 and at least 25 computers to activate clients that are running Windows 7. These minimums are referred to as activation thresholds.

To use KMS activation with Windows 7, the computer must have the qualifying OS license (often obtained through OEMs as part of the new PC purchase) and contain a Windows Marker in BIOS.

 

Source: http://technet.microsoft.com/en-us/library/ff793423.aspx

 

 

QUESTION 7

You have four Remote Desktop Session Host Servers that run Windows Server 2008 R2. The Remote Desktop Session Host Servers are named Server1, Server2, Server3, and Server4.

 

You install the Remote Desktop Connection Broker role service on Server1.

 

You need to configure load balancing for the four Remote Desktop Session Host Servers. You must ensure that Server2 is the preferred server for Remote Desktop Services sessions.

 

Which tool should you use?

 

A.

Group Policy Management

B.

Remote Desktop Session Host Configuration

C.

Remote Desktop Connection Manager

D.

RD Gateway Manager

 

Correct Answer: B

 

 

QUESTION 8

You have a server that runs Windows Server 2008 R2. The server has Microsoft SharePoint Foundation 2010 installed. The server is configured to accept incoming email.

 

You create a new document library.

 

You need to ensure that any user can send e-mail to the document library.

 

What should you do?

 

A.

Modify the RSS setting for the document library.

B.

Modify the permissions for the document library.

C.

Modify the incoming email settings for the document library.

D.

Enable anonymous authentication for the Web application.

 

Correct Answer: C

 

 

QUESTION 9

A server named Server2 runs Windows Server 2008 R2. The Remote Desktop Services server role is installed on Server2.

 

You plan to deploy an application on Server2. The application vendor confirms that the application can be deployed in a Remote Desktop Services environment. The application does not use Microsoft Windows Installer packages for installation. The application makes changes to the current user registry during installation.

 

You need to install the application to support multiple user sessions.

 

What should you do?

 

A.

Run the mstsc /v:Server2 /admin command from the client computer to log on to Server2. Install the application.

B.

Run the change user /execute command on Server2. Install the application and run the change user /install command on Server2.

C.

Run the change user /install command on Server2. Install the application and run the change user /execute command on Server2.

D.

Run the change logon /disable command on Server2. Install the application and run the change logon /enable command on Server2.

 

Correct Answer: C

Explanation:

Change user

Changes the install mode for the terminal server

 

image007

 

Source: http://technet.microsoft.com/en-us/library/cc730696(WS.10).aspx

 

 

QUESTION 10

Your company has an Active Directory domain. A server named Server2 runs Windows

Server 2008 R2. All client computers run Windows 7.

 

You install the Remote Desktop Services server role, RD Web Access role service, and RD Gateway role service on Server2.

 

You need to ensure that all client computers have compliant firewall, antivirus software, and antispyware.

 

Which two actions should you perform? (Each correct answer presents part of the solution.

Choose two.)

 

A.

Configure Network Access Protection (NAP) on a server in the domain.

B.

Add the Remote Desktop Services servers to the Windows Authorization Access domain local security group.

C.

Add the Remote Desktop Services client computers to the Windows Authorization Access domain local security group.

D.

Enable the Request clients to send a statement of health option in the Remote Desktop client access policy.

 

Correct Answer: AD

Explanation:

To ensure that all client machines have firewall, antivirus software and anti-spyware software installed, you should set the Request clients to sent a health option statement in the Remote Desktop Services client access policy and install and configure Network Access Protection (NAP) on the server in the domain.

 

image009

 

Source: http://www.microsoft.com/downloads/en/details.aspx?FamilyID=8e47649e-962c- 42f8-9e6f-21c5ccdcf490&displaylang=en

 

Instant Access to Download Latest Complete Collection of Microsoft 70-643 Real Exam

Try Microsoft 70-643 Free Demo