Ensurepass

QUESTION 11

Your network environment includes a Microsoft Visual Studio Team Foundation Server (TFS) 2012 server. Your TFS environment currently consists of a single team project collection (TPC) named DevTPC, one build controller named BC-1, and one build agent named BA-1. You need to create a separate TFS test environment by cloning your existing environment. You need to achieve this goal by utilizing as few new TFS services as possible. Which of the following diagrams shows the correct architecture for solving this problem?

 

clip_image001

 

A.

Option A

B.

Option B

C.

Option C

D.

Option D

 

Correct Answer: C

 

 

QUESTION 12

Your client’s network environment includes a Microsoft Visual Studio Team Foundation Server (TFS) 2012) server installed at its main office. Branch offices have limited bandwidth connecting to the main office. Client team members at one of the branch offices report that it is taking too long to retrieve files from source control. You need to speed up the source control access for their most commonly accessed files. What should you do?

 

A.

Install a SQL server at the remote office and configure replication of the source control database from the main office to the SQL server at the remote office.

Install and configure a TFS proxy server at the remote office to use the replicated database.

Configure all the clients at the remote office to use the new proxy server

B.

Install a new TFS instance at the remote office and configure it to sync with the main office.

Configure all the clients at the remote office to connect to the new TFS instance.

C.

Install and configure a TFS proxy server at the remote office.

Configure all the clients at the remote office to use the new proxy server.

D.

Install and configure a TFS proxy server at the remote office.

Run the TFSConfig.exe command to redirect remote users to the TFS proxy server based on IP address.

Install and configure a TFS proxy server at the remote office.

Run the TFS Admin Console command to redirect remote users to the TFS proxy server based on IP address.

 

Correct Answer: C

 

 

QUESTION 13

Your network environment includes a Microsoft Visual Studio Team Foundation Server (TFS) 2012 server. Your development team uses Visual Studio 2012.

 

You store specialized design files within your Visual Studio solution by using version control. These design files are stored in a proprietary binary format and use the filename extension .dzn.

 

You need to meet the following requirements:

 

clip_image003Ensure that all developers can modify these design files.

clip_image003[1]Prevent multiple check-outs on all .dzn files.

clip_image003[2]Ensure that all other file types can be edited by multiple developers at the same time.

 

What should you do?

 

A.

Within the Source Control Explorer, right-click each .dzn file and uncheck the Allow

multiple check outs option.

B.

Add a new file type for .dzn to the Team Project Source Control Settings and clear the Enable file merging and multiple check out checkbox.

C.

Within the Visual Studio Options dialog box for Source Control, add the .dzn extension to the Prevent multiple check-outs for the following file types list in the Visual Studio Team Foundation server node.

D.

Add a new file type for .dzn to the Team Project Collection Source Control Settings and clear the Enable file merging and multiple check out checkbox.

 

Correct Answer: D

 

 

QUESTION 14

Your network environment includes a Microsoft Visual Studio Team Foundation Server (TFS) 2012 server. Your developers use Visual Studio 2012. Developers frequently work from locations where there is no network connection. You need to ensure that developers are able to easily compare their current changes to the last version retrieved from version control. Which type of workspace should you configure?

 

A.

Server

B.

Local

C.

Server-synchronized

D.

Windows Azure

 

Correct Answer: B

 

QUESTION 15

Your network environment includes a Microsoft Visual Studio Team Foundation Server (TFS) 2012 server. You create a new build definition and select the Continuous Integration trigger. The build definition runs a build verification test. You discover that the build fails because the build verification test has not passed, even though compilation of the source code succeeds. You need to prevent further check-ins until the code passes the build verification test and the build succeeds. What should you do?

 

A.

Enable the Builds check-in policy.

B.

Configure the build definition’s source control folders to be read-only for the other developers.

C.

Enable the Testing check-in policy. Select the same test that is used as the build verification test to be run and passed for the check-in to succeed.

D.

Configure the server-side check-in event handler to roll back if the earlier build has failed.

 

Correct Answer: A

 

 

QUESTION 16

Your network environment includes a Microsoft Visual Studio Team Foundation Server (TFS) 2012 server. The Application Lifecycle Management (ALM) Center of Excellence of your organization has created a ruleset to perform the code analysis of the code being developed. You need to ensure that all developer’s code passes the static code analysis with the custom ruleset at the time of check in. Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)

 

A.

Under the source control of the team project, check in the .ruleset file.

B.

Create a .reg file on your machine to add a registry entry for the Code Analysis policy with the custom ruleset under H

KEY_LOCAL_MACHINE\Software\Microsoft\VisualStudio\1 11.0_Config\TeamFoundation\SourceControl\Checkin Policies.

C.

Distribute the .reg file that you have created to all developers and request them to run it with elevated privileges.

D.

Add Code Analysis check-in policy team project source control settings. When prompted, select the custom ruleset file by browsing under the source control.

 

Correct Answer: AD

 

 

QUESTION 17

Your network environment includes a Microsoft Visual Studio Team Foundation Server 2012 (TFS) server and several TFS 2012 build servers configured. You need to ensure that developers compile their own code against the latest code before checking their changes into source control. What should you do?

 

A.

Enable the check-out setting to download the latest copy of an item before checking it out.

B.

Create a build definition for the solution with a gated check-in trigger.

C.

Create a build definition for the solution with a continuous integration trigger.

D.

Create a build definition for the solution with a rolling builds trigger, and configure the Builds check-in policy.

 

Correct Answer: B

 

 

 

QUESTION 18

Your client’s network environment includes a Microsoft Visual Studio Team Foundation Server (TFS) 2012 server installed at its main office. The network administrator at a remote office reports high WAN utilization. Users at the remote office report slow response times when downloading source code. You need to minimize WAN utilization and improve the response times for downloading source code. What should you do?

 

A.

Install TFS Server at the remote site and set up database synchronization between the existing TFS Server and the remote site.

B.

Install and configure TFS Proxy at the remote site. Point the TFS Proxy to the TFS server and point Team Explorer to the TFS Proxy.

C.

Install and configure IIS caching. Point Team Explorer to the IIS server.

D.

Install TFS Proxy at the remote site. Configure TFS Proxy to point to the TFS Server and configure each user’s Visual Studio Source Control to use the proxy server for file downloads.

 

Correct Answer: D

 

 

QUESTION 19

Your network environment includes a Microsoft Visual Studio Team Foundation Server (TFS) 2012 server. A user places a large shelveset on the TFS server. You need to delete the shelveset. What should you do?

 

A.

Use the tf shelvesets command with the /delete parameter.

B.

Use the tf shelve command with the /move parameter.

C.

Use the tf unshelve command with the /delete parameter.

D.

Use the tf shelve command with the /delete parameter.

 

Correct Answer: D

 

 

QUESTION 20

DRAG DROP

Your network environment includes a Microsoft Visual Studio Team Foundation Server (TFS) 2012 server. A developer has left the company and still has files checked out. The developer’s computer is no longer available to undo the checkouts. You need to undo any checked-out files for the user. You also need to delete the user’s workspace. What should you do? (To answer, move the three appropriate actions from the list of actions to the answer area and arrange them in the correct order.)

 

clip_image005

 

Correct Answer:

clip_image007

 

Instant Access to Download Latest Complete Collection of Microsoft 70-496 Real Exam

Try Microsoft 70-496 Free Demo