Ensurepass

QUESTION 48

DRAG DROP

You have an Exchange Server 2013 organization that has Information Rights Management (IRM) configured. Users report that they cannot apply IRM protection to email messages from Outlook Web App. You verify that the users can protect the messages by using IRM from Microsoft Outlook. You need to recommend a solution to ensure that the users can protect email messages by using IRM from Outlook Web App. Which four actions should you recommend? To answer, move the four appropriate actions from the list of actions to the answer area and arrange them in the correct order.

 

image110

 

Correct Answer:

image112

 

 

QUESTION 49

You plan to deploy 20 Client Access servers that will have Exchange Server 2013 installed. You need to prepare the certificate required for the planned deployment. The solution must ensure that the same certificate can be used on all of the Client Access servers. What should you do first?

 

A.

On one of the Client Access servers, run the New-ExchangeCertificate cmdlet and specify the privatekeyexportable parameter.

B.

On all of the Client Access servers, run the Get-ExchangeCertificate cmdiet.

C.

On one of the Client Access servers, run the New-ExchangeCertificate cmdiet and specify the binaryencoded parameter.

D.

On one of the Client Access servers, start the Certificates console and run the Certificate Import Wizard.

 

Correct Answer: A

 

 

QUESTION 50

Contoso, Ltd., and Fabrikam, Inc., are partner companies. Each company has an Exchange Server 2013 organization in a data center that is connected to the Internet. All of the Exchange servers in both of the organizations have the Client Access server role and the Mailbox role installed.

 

The data centers connect to each other by using a redundant high-speed WAN link.

 

The following mail exchanger (MX) records are configured:

 

image006Contoso.com MX 10 mail.contoso.com

image006[1]Fabrikam.com MX 10 mail.fabrikam.com

 

You need to recommend a solution for inbound mail flow.

 

The solution must meet the following requirements:

 

image006[2]Users in both companies must receive email from the Internet if either of the Internet links fails.

image006[3]Mail from the Internet to contoso.com must be received by mail.contoso.com if the Internet link at the Contoso data center is available.

image006[4]Mail from the Internet to fabrikam.com must be received by mail.fabrikam.com if the Internet link at the Fabrikam data center is available.

 

Which two actions should you recommend? (Each correct answer presents part of the solution. Choose two.)

 

A.

Create the following DNS records:

Contoso.com MX 20 mail.fabrikam.com

Fabrikam.com MX 20 mail.contoso.com

B.

Create the following DNS records:

Contoso.com MX 10 mail.fabrikam.com

Fabrikam.com MX 10 mail.contoso.com

C.

For each organization, configure an internal relay domain and a Send connector.

D.

For each organization, configure an external relay domain and a Receive connector.

E.

Create the following DNS records:

Contoso.com MX 5 mail.fabrikam.com

Fabrikam.com MX 5 mail.contoso.com

 

Correct Answer: AD

Explanation:

A: Use a priority above 10.

D: “Each company has an Exchange Server 2013 organization”. We therefore need to configure an External relay. An Internal relay would be used if the two SMTP domains were in the same Exchange organization. We also need to configure a Receive connector in each organization to allow the organization to receive email destined for the other organization.

 

 

QUESTION 51

DRAG DROP

You have an Exchange Server 2013 database availability group (DAG). Each member of the DAG has two network interfaces named Network1 and Network2. Network1 is used for client connections. Network2 is used for database replication. Network2 fails. You discover that replication traffic is sent over Network1. You need to ensure that all of the database replication traffic is sent over Network2. The solution must minimize database replication downtime. Which three actions should you perform? To answer, move the three appropriate actions from the list of actions to the answer area and arrange them in the correct order.

 

image114

 

Correct Answer:

image116

 

 

 

 

 

 

 

QUESTION 52

You have an Exchange Server 2013 organization that contains two servers. The servers are configured as shown in the following table.

 

image117

 

EX1 and EX2 are members of a database availability group (DAG) named DAG1.

 

You have a database named DB1 that replicates to EX1 and EX2. EX1 fails. You discover that DB1 does not mount on EX2.

 

You view the status of the mailbox databases as shown in the following table.

 

image119

 

You need to ensure that the database attempts to mount on EX2 if EX1 fails.

 

What should you change?

 

A.

The AutoDatabaseMountDial setting to Lossless

B.

The AutoDatabaseMountDial setting to BestAvailabilty

C.

The activation preference of DB1\EX2

D.

The activation preference of DB1\EX1

 

Correct Answer: B

Explanation:

The MailboxServer.AutoDatabaseMountDial property gets or sets the automatic database mount behavior for an Exchange server that is running the Mailbox server role in a continuous replication environment after a database failover.

 

The AutoDatabaseMountDial property specifies the automatic database mount behavior of a Mailbox server after a failover. Each behavior is based on the copy queue length, or the number of logs that are recognized by the passive copy that need to be replicated. If the copy queue length is greater than the value specified for the behavior, the database does not automatically mount. If the copy queue length is less than or equal to the value specified for the behavior, the Mailbox server tries to copy the remaining logs to the passive copy and mounts the database.

 

BestAvailability

The database automatically mounts immediately after a failover if the queue length is less than or equal to 12.

 

Incorrect:

Not A: Lossless

The database does not automatically mount until all logs generated on the active device are copied to the passive device

 

QUESTION 53

Your company has a data center in New York and a data center in Miami. The company has an Exchange Server 2013 organization that contains a database availability group (DAG). The DAG contains servers in both data centers. The company plans to deploy Outlook Anywhere to all users.

 

You configure the following:

 

image006[5]All of the Exchange Server 2013 virtual directories in the New York data center use a host name of mail.contoso.com.

image006[6]All of the Exchange Server 2013 virtual directories in the Miami data center use a host name of miami.mail.contoso.com.

 

In each data center, a certificate from an enterprise certification authority (CA) is configured to contain the following:

 

image006[7]A certificate principal name of mail.contoso.com

image006[8]Subject alternate names of mail.contoso.com and miami.mail.contoso.com

 

You need to recommend which task must be performed to meet the following requirements:

 

image006[9]Users always must attempt to connect first to a server in the data center where their mailbox is located.

image006[10]Users must be able to access their mailbox if a single data center fails.

 

What should you recommend?

 

A.

Change the external host name of the Miami data center to mail.contoso.com.

B.

Modify the ExternalUrl of the Autodiscover virtual directory of the Client Access servers.

C.

Run the Set-OutlookProvider cmdlet.

D.

Run the Add-AvailabilityAddressSpace cmdlet.

 

Correct Answer: C

Explanation:

The Set-OutlookProvider cmdlet creates the global settings for the Autodiscover service. It sets the AutoDiscoverConfig object under the Global Settings object in Active Directory and sets the attributes specified in the parameters listed in the Parameters section.

 

The AutoDiscover feature in Exchange 2007/2010 is often overlooked during setup but is an important factor in ensuring smooth day to day running of your Exchange environment. Its main function is to provide the mail client with all the configuration options it needs, from only the user’s email address and password. This is particularly useful for remote users and smartphone users, who no longer have to enter advanced settings like server names and domains. It is also vital for the correct functioning of features such as Out Of Office and the Offline Address Book in Outlook.

 

 

QUESTION 54

Your company has offices in Tokyo, Bangkok, and Shanghai.

 

All connections to the Internet are routed through an Internet connection in the Tokyo office. All of the offices connect to each other by using a WAN link.

 

The network contains 10 servers that have Exchange Server 2010 installed. The servers are configured as shown in the following table.

 

image120

 

You plan to deploy 10 servers that will have Exchange Server 2013 installed.

 

The servers will be configured as shown in the following table.

 

image121

 

Each site has an IP-PBX that provides telephony services for the mailboxes in that site by using unsecured SIP over TCP 5070. The IP-PBX uses the same port to connect to multiple SIP peers.

 

You need to recommend which tasks must be performed to ensure that the Unified Messaging (UM) features are available to the mailboxes if a single server fails.

 

Which three actions should you include in the recommendation? (Each correct answer presents part of the solution. Choose three.)

 

A.

Configure the Exchange Server 2013 Mailbox servers to listen to unsecured SIP on TCP 5070.

B.

Configure the Exchange Server 2013 Client Access servers to listen to unsecured SIP on TCP 5070.

C.

Install the Client Access server role on the Exchange Server 2013 servers in the Shanghai and Bangkok offices.

D.

Configure the Exchange Server 2013 Mailbox servers as additional SIP peers that contain new pilot identifiers.

E.

Configure the Exchange Server 2013 Client Access servers as additional SIP peers that contain new pilot identifiers.

 

Correct Answer: BCE

Explanation:

Note:

Exchange 2013 Unified Messaging offers administrators:

 

A complete voice mail system

Unified Messaging offers a complete voice mail solution using a single store, transport, and directory infrastructure. The store is provided by a Mailbox server and forwarding of incoming calls from a VoIP gateway or IP PBX is handled by a Client Access server. All email and voice mail messages can be managed from a single management point, using a single administration interface and tool set.

 

An Exchange security model

The Microsoft Exchange Unified Messaging service on a Mailbox server and the Microsoft Exchange Unified Messaging Call Router service on a Client Access server run as a single Exchange server account.

 

Consolidation

The client access server (CAS) is a server role that handles all client connections to Exchange Server 2010 and Exchange 2013. The CAS supports all client connections to Exchange Server from Microsoft Outlook and Outlook Web App, as well as ActiveSync applications. The CAS also provides access to free/busy data in Exchange calendars.

 

The CAS is one of five server roles in Exchange Server 2007 and Exchange 2010, and one of two server roles in Exchange Server 2013. It must be installed in every Exchange Server organization and on every Active Directory (AD) site that has the Exchange mailbox server role installed.

 

 

QUESTION 55

You have an Exchange Server organization that contains five servers. The servers are configured as shown in the following table.

 

image122

 

You need to create a Lync Server SIP Unified Messaging (UM) dial plan to enable voice integration between Lync Server and Exchange Server.

 

Which three Exchange servers should you associate to the UM dial plans? (Each correct answer presents part of the solution. Choose three.)

 

A.

EX1

B.

EX2

C.

EX3

D.

EX4

E.

EX5

 

Correct Answer: CDE

Explanation:

Requirements and Recommendations

Client Access and Mailbox. In Microsoft Exchange Server 2013, Exchange UM runs as a service on these servers.

 

Reference:

Configuring Unified Messaging on Microsoft Exchange Server to Work with Lync Server 2013

 

 

QUESTION 56

DRAG DROP

You have a server that has Exchange Server 2013 installed.

 

You plan to configure Unified Messaging (UM) to connect to an IP-PBX.

 

A telecommunications administrator configures the following numbers on the IP-PBX:

 

image006[11]First extension number: 12100

image006[12]Last extension number: 12499

image006[13]Help extension number: 12500

image006[14]Incoming pilot number: 12000

 

You need to configure UM to support the following requirements:

 

image006[15]Users must be able to use Outlook Voice Access.

image006[16]Users must be able to receive voice mail when callers connect to the users’ extension.

image006[17]Callers must be able to dial into an automated help system hosted by your company, which uses standard menus and speech-enabled menus.

 

Which numbers should you use for the UM configurations?

 

To answer, drag the appropriate number to the correct UM object in the answer area. Each number may be used once, more than once, or not at all. Additionally, you may need to drag the split bar between panes or scroll to view content.

 

image123

 

Correct Answer:

image124

 

 

QUESTION 57

DRAG DROP

You are an administrator for a company named Contoso, Ltd. The company is an international reseller that has offices worldwide. One of the offices is located in France. Each office contains several servers that have Exchange Server 2013 installed. The Exchange Server organization is configured for Unified Messaging (UM). Each office contains an IP-PBX device. You need to ensure that callers to the France office can navigate the voice mail system menu in French. In which order should you perform the actions? To answer, move all actions from the list of actions to the answer area and arrange them in the correct order.

 

image126

 

Correct Answer:

image128

 

 

QUESTION 58

You have an Exchange Server 2013 organization. You successfully migrate the public folders from a previous version of Exchange Server. You discover that one of the public folder mailboxes almost reached its quota size. You need to move some of the public folders in the public folder mailbox to another public folder mailbox. What should you run?

 

A.

Split-PublicFolderMailbox.ps1

B.

Set-MailPublicFolder

C.

Update-PublicFolderMailbox

D.

Set-PublicFolderMailbox

 

Correct Answer: A

Explanation:

Split-PublicFolderMailbox.ps1

Splits the given public folder mailbox based on the size of the folders.

 

If the content of a public folder mailbox begins to exceed your mailbox quotas, you may need to move public folders to a different public folder mailbox. There are a couple ways to do this. To move one or more public folders that don’t contain subfolders, you can use the PublicFolderMoveRequest cmdlets.

 

Reference:

Move a Public Folder to a Different Public Folder Mailbox

 

 

QUESTION 59

You have a hybrid deployment of Exchange Server 2013 and Microsoft Office 365. The network does not have Active Directory Federation Services (AD FS) 2.0 installed. A user named User1 reports that he cannot access his mailbox because his account is locked out. You verify that the mailbox of User1 is hosted on Office 365. You need to unlock the account of User1. Which cmdlet should you run?

 

A.

Set-MailUser

B.

Set-MSolUser

C.

Set-Mailbox

D.

Set-ADUser

 

Correct Answer: B

Explanation:

Applies To: Office 365, Windows Azure, Windows Intune

 

The Set-MsolUser cmdlet is used to update a user object.

 

Parameters include: BlockCredential <Boolean>

When true, the user will not be able to sign in using their user ID.

 

Incorrect:

Not C: Set-Mailbox

 

Use the Set-Mailbox cmdlet to modify the settings of an existing mailbox.

 

Applies to: Exchange Server 2013, Exchange Online

 

 

QUESTION 60

You have a hybrid deployment of Exchange Server 2013 and Office 365. The mail flow between Office 365 and the on-premises Exchange Server environment is routed through an Exchange Server 2010 Edge Transport server. Your company is assigned a new set of public IP addresses. A network administrator updates the external firewall address and all of the associated DNS records. Office 365 users report that they cannot receive email messages from on-premises users. You discover that outgoing email messages to Office 365 are in the Office 365 SMTP queue on an Edge server. You need to ensure that the on-premises users can send email messages successfully to the Office 365 users. Which tool should you use?

 

A.

The Exchange Management Console

B.

The Exchange Control Panel in Office 365

C.

The Exchange Admin Center

D.

The Exchange Remote Connectivity Analyzer

 

Correct Answer: C

Explanation:

Note:

The section describes the user interface elements that are common across the EAC (Exchange Admin Center).

 

image130

 

Instant Access to Download Latest Complete Collection of Microsoft 70-342 Real Exam

Try Microsoft 70-342 Free Demo