Ensurepass.com : Ensure you pass the IT Exams
2018 May Microsoft Official New Released 70-980
100% Free Download! 100% Pass Guaranteed!

Recertification for MCSE: Server Infrastructure

Question No: 141 – (Topic 8)

Your network contains an Active Directory domain. The domain contains a site named

Site1.

All of the client computers in Site1 use static IPv4 addresses on a single subnet. Site1 contains a Storage Area Network (SAN) device and two servers named Server1 and Server2 that run Windows Server 2012.

You plan to implement a DHCP infrastructure that will contain Server1 and Server2. The infrastructure will contain several IP address reservations. You need to recommend a solution for the DHCP infrastructure to ensure that clients can receive IP addresses from a DHCP server if either Server1 or Server2 fails.

What should you recommend? (Each correct answer is a complete solution. Choose all that apply.)

  1. Configure all of the client computers to use IPv6 addresses, and then configure Server1 and Server2 to run DHCP in stateless mode.

  2. Configure Server1 and Server2 as members of a failover cluster, and then configure DHCP as a clustered resource.

  3. Configure a DHCP failover relationship that contains Server1 and Server2.

  4. Create a scope for each server, and then configure each scope to contain half of the IP addresses.

Answer: B,C,D

Reference: http://blogs.technet.com/b/teamdhcp/archive/2012/06/28/ensuring-high- availability-of-dhcp-usingwindowsserver-2012-dhcp-failover.aspx

Question No: 142 – (Topic 8)

Your network contains an Active Directory domain named contoso.com. The domain contains several domain controllers. The domain controllers run either Windows Server 2012 or Windows Server 2008 R2.

The domain functional level is Windows Server 2008 R2. The forest functional level is Windows Server 2008.

The corporate compliance policy states that all items deleted from Active Directory must be recoverable from a Recycle Bin.

You need to recommend changes to the current environment to meet the compliance policy.

Which changes should you recommend? (Each correct answer presents part of the solution. Choose all that apply.)

  1. Raise the forest functional level to Windows Server 2008 R2.

  2. Run the Enable-ADOptionalFeature cmdlet.

  3. Run the New-ADObject cmdlet.

  4. Run the Set-Server cmdlet

  5. Raise the domain functional level to Windows Server 2012.

Answer: A,B Explanation:

You can enable Active Directory Recycle Bin only if the forest functional level of your environment is set to Windows Server 2008 R2.

B: Enabling Active Directory Recycle Bin

After the forest functional level of your environment is set to Windows Server 2008 R2, you can enable Active Directory Recycle Bin by using the following methods:

/ Enable-ADOptionalFeature Active Directory module cmdlet (This is the recommended method.)

/ Ldp.exe

Note: By default, Active Directory Recycle Bin in Windows Server 2008 R2 is disabled. Reference: Enable Active Directory Recycle Bin

Question No: 143 – (Topic 8)

You have a Hyper-V host named Server1 that runs Windows Server 2012 R2. Server1 hosts 50 virtual machines that run Windows Server 2012 R2.

Your company uses smart cards for authentication. You need to ensure that you can use smart card authentication when you connect to the virtual machine by using Virtual Machine Connection.

What should you configure?

  1. The NUMA Spanning settings

  2. The RemoteFX settings

  3. The Enhanced Session Mode Policy

  4. The Integration Services settings

Answer: C

Question No: 144 – (Topic 8)

Your company has three main offices named Main1, Main2, and Main3. The network contains an Active Directory domain named contoso.com. Each office contains a help desk group.

You plan to deploy Microsoft System Center 2012 Configuration Manager to meet the following requirements:

-> The members of the Domain Admins group must be able to manage all of the Configuration Manager settings.

-> The help desk groups must be able to manage only the client computers in their

respective office by using Configuration Manager.

You need to recommend a Configuration Manager infrastructure to meet the requirements.

Which infrastructure should you recommend? More than one answer choice may achieve the goal. Select the BEST answer.

  1. Three sites that contain one collection for each office

  2. One site that contains one collection

  3. Three sites that each contain one collection

  4. One site that contains a collection for each office

Answer: D

Question No: 145 – (Topic 8)

Your network contains five servers that run Windows Server 2012 R2.

You install the Hyper-V server role on the servers. You create an external virtual network switch on each server.

You plan to deploy five virtual machines to each Hyper-V server. Each virtual machine will have a virtual network adapter that is connected to the external virtual network switch and that has a VLAN identifier of 1.

Each virtual machine will run Windows Server 2012 R2. All of the virtual machines will run the identical web application.

You plan to install the Network Load Balancing (NLB) feature on each virtual machine and join each virtual machine to an NLB cluster. The cluster will be configured to use unicast only.

You need to ensure that the NLB feature can distribute connections across all of the virtual machines.

Solution: On each Hyper-V server, you create a new external virtual network switch. From the properties of each virtual machine, you add a second virtual network adapter and connect the new virtual network adapters to the new external virtual network switches.

Does this meet the goal?

  1. Yes

  2. No

Answer: B

Question No: 146 – (Topic 8)

You plan to allow users to run internal applications from outside the company#39;s network. You have a Windows Server 2012 R2 that has the Active Directory Federation Services (AD FS) role installed. You must secure on-premises resources by using multi-factor authentication (MFA). You need to design a solution to enforce different access levels for users with personal Windows 8.1 or iOS 8 devices.

Solution: You migrate the AD FS server to Microsoft Azure and connect it to the internal Active Directory instance on the network. Then, you use the Workplace Join process to

configure access for personal devices to the on-premises resources. Does this meet the goal?

  1. Yes

  2. No

Answer: A

Question No: 147 – (Topic 8)

Your network contains an Active Directory domain named contoso.com. The domain contains a Microsoft System Center 2012 infrastructure.

You deploy a service named Service1 by using a service template. Service1 contains two virtual machines. The virtual machines are configured as shown in the following table.

Ensurepass 2018 PDF and VCE

You need to recommend a monitoring solution to ensure that an administrator can review the availability information of Service1.

Solution: From Operations Manager, you create a Distributed Application and a Monitor Override.

Does this meet the goal?

  1. Yes

  2. No

Answer: B

Question No: 148 – (Topic 8)

Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2012 R2. The network contains a System Center 2012 R2 Data Protection Manager (DPM) deployment.

The domain contains six servers. The servers are configured as shown in the following table.

Ensurepass 2018 PDF and VCE

You install System Center 2012 R2 Virtual Machine Manager (VMM) on the nodes in Cluster2.

You configure VMM to use a database in Cluster1. Server5 is the first node in the cluster. You need to back up the VMM encryption key.

What should you back up?

  1. A full system backup of Server1

  2. A full system backup of Server3

  3. A backup of the Windows\DigitalLocker folder on Server5

  4. A backup of the Windows\DigitalLocker folder on Server1

Answer: A

Question No: 149 – (Topic 8)

Your network contains three servers named HV1, HV2, and Server1 that run Windows Server 2012 R2. HV1 and HV2 have the Hyper-V server role installed. Server1 is a file server that contains 3 TB of free disk space.

HV1 hosts a virtual machine named VM1. The virtual machine configuration file for VM1 is stored in D:\VM and the virtual hard disk file is stored in E:\VHD.

You plan to replace drive E with a larger volume. You need to ensure that VM1 remains available from HV1 while drive E is being replaced. You want to achieve this goal by using the minimum amount of administrative effort.

What should you do?

  1. Perform a live migration to HV2.

  2. Add HV1 and HV2 as nodes in a failover cluster. Perform a storage migration to HV2.

  3. Add HV1 and HV2 as nodes in a failover cluster. Perform a live migration to HV2.

  4. Perform a storage migration to Server1.

Answer: D

Question No: 150 – (Topic 8)

You have a server named Server1 that runs Windows Server 2012 R2. You plan to enable Hyper-V Network Virtualization on Server1. You need to install the Windows Network Virtualization Filter Driver on Server1.

Which Windows PowerShell cmdlet should you run?

  1. Set-NetVirtualizationGlobal

  2. Enable-NetAdapterBinding

  3. Add – WindowsFeature

  4. Set-NetAdapterVmq

Answer: B Explanation:

Hyper-V Network Virtrtualization runs multiple virtual networks on a physical network. And

each virtual network operates as if it is running as a physical network.

The The Set-NetAdaptercmdlet sets the basic properties of a network adapter such as virtual LAN (VLAN) identifier (ID) and MAC address.

Thus if you add the binding parameter to the command then you will be able to install the Windows Network Virtualization Filter Driver.

Step one:Enable Windows Network Virtualization (WNV). This is a binding that is applied to the NIC that you External Virtual Switch is bound to.

This can be a physical NIC, it can be an LBFO NIC team. Either way, it is the network adapter that your External Virtual Switch uses to exit the server.

This also means that if you have multiple virtual networks or multiple interfaces that you can pick and choose and it is not some global setting.

If you have one External Virtual Switch this is fairly easy:

$vSwitch = Get-VMSwitch -SwitchType External# Check if Network Virtualization is bound# This could be done by checking for the binding and seeing if it is enabledForEach-Object – InputObject $vSwitch {if ((Get-NetAdapterBinding -ComponentID quot;ms_netwnvquot; – InterfaceDescription$_.NetAdapterInterfaceDescription).Enabled -eq $false){ # Lets enable itEnable-NetAdapterBinding -InterfaceDescription $_.NetAdapterInterfaceDescription – ComponentID quot;ms_netwnvquot;}}

100% Ensurepass Free Download!
Download Free Demo:70-980 Demo PDF
100% Ensurepass Free Guaranteed!
Download 2018 EnsurePass 70-980 Full Exam PDF and VCE

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No