VMware Certified Professional 6 – Network Virtualization (NSX v6.2) Exam
Question No: 61
Which are two uses of the NSX DLR protocol address? (Choose two.)
When configuring BGP the protocol address is used to forward traffic to peers.
When configuringBGP the protocol address is used by the protocol to form adjacencies with peers.
When configuring OSPF the protocol address is used to forward traffic to peers.
When configuring OSPF the protocol address is used by the protocol to form adjacencies with peers.
Answer: B,D Explanation:
For a logical router
Click Edit at the top right corner of the window. b
Click Enable OSPF. c
In Forwarding Address, type an IP address that is to be used by the router datapath module in the hosts to forward datapath packets.
In Protocol Address, type a unique IP address within the same subnet as the Forwarding Address. Protocol address is used by the protocol to form adjacencies with the peers
From lt;https://pubs.vmware.com/NSX-6/topic/com.vmware.nsx.admin.doc/GUID- 6E985577-3629-42FE-AC22-C4B56EFA8C9B.htmlgt;
Question No: 62
When deploying a standalone NSX Edge as a Layer 2 VPN client, which port needs to be configured on the client vSphere Distributed Switch?
Answer: A Explanation:
Referencehttps://pubs.vmware.com/NSX- 62/index.jsp?topic=/com.vmware.nsx.admin.doc/GUID-C9E2B0E4-F1C1-44A7- B142-F814F801FA42.html
Question No: 63
Which type of VPN should be configured to ensure application mobility data centers?
Answer: B Explanation:
Referencehttps://www.vmware.com/content/dam/digitalmarketing/vmware/en/pdf/products/ nsx/vmw-nsx-network-virtualization-design-guide.pdf(page 23)
Question No: 64
Which two methods does VMware NSX offer to integrate with third-party partners? (Choose two )
Universal Synchronization Service
Explanation: https://docs.vmware.com/en/VMware-NSX-for- vSphere/6.3/com.vmware.nsx.admin.doc/GUID-EA477D96-E2D3-488B-90AA- 2F19B4AE327D.html#GUID-EA477D96-E2D3-488B-90AA-2F19B4AE327D
Question No: 65
A workload was attached to a logical switch port group in Compute Cluster 1. Users are complaining that I hey can communicate with other workloads on that port group in the
cluster, but not with other workloads on different networks.
What is the most probable cause?
The distributed firewall has a default rule set to deny all
The Distributed Logical Router was not configured on Compute Cluster 1
Compute Cluster 1 is NOT a member of the Transport Zone
An NSX Edge has NOT been deployed into Compute Cluster 1
Question No: 66
The fact that NSX Data Security has visibility into sensitive data provides which two benefits? (Choose two )
It helps address compliance and risk management requirements.
It acts as a forensic tool to analyze TCP and UDP connections between virtual machines
It is able to trace packets between a source and destination without requiring access to the guest OS
It eliminates the typical agent footprint that exists with legacy software agents
Question No: 67
What needs to be deployed before configuring the identify Firewall?
Network hit inspection
Explanation: https://docs.vmware.com/en/VMware-NSX-for- vSphere/6.2/rn/releasenotes_nsx_vsphere_624.html
Question No: 68
Which highly available Edge design would provide high bandwidth and isolation to four application networks?
Four Distributed Routers (standalone mode) with one Edge Services Gateway in Active/Standby mode.
One Edge Services Gateway in ECMP mode.
One distributed Router (in HA mode) withtwo Edge Services Gateways in ECMP mode.
Four Distributed Routers (in HA mode) with one Edge Services Gateway in Active/Standby mode.
Question No: 69
What is the best practice workflow for a NSX installation to support logical switching?
Deploy NSX Manager, Configure Logical Switches, Register with vCenter, Deploy Controllers. Prepare hosts
Deploy NSX Manager, Deploy Controllers, Configure Logical Switches, Register withvCenter, Prepare hosts
Deploy NSX Manager, Register with vCenter, Prepare hosts, Deploy Controllers, Configure Logical Switches
Deploy NSX Manager, Register with vCenter, Deploy Controllers, Prepare hosts, Configure Logical Switches
Explanation: https://docs.vmware.com/en/VMware-NSX-for- vSphere/6.3/com.vmware.nsx.install.doc/GUID-E651F026-B646-4F18-83C3- 92CAD0D9533B.html
Question No: 70
Which vSphere network object obstructs the physical network, provides access-level switching in the hypervisor and enables support tot overlay networking?
Distributed Port Group
Answer: C Explanation:
|Lowest Price Guarantee||Yes||No||No|
|Free VCE Simulator||Yes||No||No|