Dumps4cert.com : Latest Dumps with PDF and VCE Files
2018 May CompTIA Official New Released N10-006
100% Free Download! 100% Pass Guaranteed!

CompTIA Network Certification

Question No: 211 – (Topic 6)

A project manager is tasked with the planning of a new network installation for a client. The client wants to ensure that everything discussed in the meetings will be installed and configured when a network engineer arrives onsite. Which of the following should the project manager provide the client?

  1. Acceptable Use Policy

  2. Service Level agreement

  3. Statement of work

  4. Security Policy

Answer: C

Question No: 212 – (Topic 6)

A technician is attempting to resolve an issue with users on the network not being able to access websites. The technician pings the default gateway and DNS servers successfully. Pinging a website by URL is unsuccessful but using a known IP address is successful.

Which of the following will resolve the issue?

  1. Update the HOST file with the URLs for all websites

  2. Use NSLOOKUP to resolve URLs

  3. Ensure ICMP messages can pass through the firewall

  4. Enable port 53 on the firewall

Answer: D

Question No: 213 – (Topic 6)

Host1’s application generates a payload of 2500B of data and sends to Host2. When the application on Host2 receives the payload it will be:

  1. more than 2500B due to encapsulation.

  2. 2500B in size.

  3. less than 2500B due to decapsulation.

  4. 1500B due to the default MTU settings.

Answer: B Explanation:

http://techterms.com/definition/payload

Question No: 214 – (Topic 6)

A small office has an Internet connection that drops out about two times per week. It often takes until the next day for the vendor to come out and fix the issue. Which of the following should the office implement to reduce this downtime?

  1. EULA

  2. SLA

  3. SOW

  4. MOU

Answer: B

Question No: 215 – (Topic 6)

Two switches are connected using both a CAT6 cable and a CAT5e cable. Which of the following problems is occurring?

  1. Missing route

  2. Autosensing ports

  3. Improper cable types

  4. Switching loop

  5. Media mismatch

Answer: D

Question No: 216 – (Topic 6)

A network technician is asked to redesign an Ethernet network before new monitoring software is added to each host on the network. The new software will broadcast statistics from each host to a monitoring host for each of the five departments in the company. The added network traffic is a concern of management that must be addressed. Which of the following solutions should the technician design into the new network?

  1. Place each department in aseparate VLAN

  2. Add a router and create a segment for all the monitoring host stations

  3. Increase the number of switches on the network to reduce broadcasts

  4. Increase the collision domain to compensate for the added broadcasts

Answer: A

Question No: 217 – (Topic 6)

A network engineer has been tasked with designing a network for a new branch office with approximately 50 network devices. This branch office will connect to the other offices via a MAN. Many of the other branch offices use off-the-shelf SOHO equipment. It is a requirement that the routing protocol chosen use the least amount of overhead.

Additionally, all computers on the network will be part of a single VLAN. The connection between these computers should produce the highest throughput possible, in the most cost effective manner. Which of the following devices would be MOST appropriate?

  1. A router should be used as a gateway device, with RIPv2 as the routing protocol. The computers should be connected to one another with a Gb Layer 2 switch.

  2. A UTM should be used as a gateway device, with BGP as the routing protocol. The computers should be connected to one another using 1Gb Fibre Channel.

  3. A router should be used as a gateway device, with EIGRP as the routing protocol. The computers should be connected to one another using a single 802.11N MIMO access point.

  4. A router should be used as a gateway device, with OSPF as the routing protocol. The computers should be connected to one another using a Gb Layer 3 switch.

Answer: A Explanation:

A Gb Layer 2 switch is the cheapest switching solution offering 1Gbps network connectivity between the computers. RIPv2 has a lower overhead as required in the question.

Question No: 218 – (Topic 6)

A common technique used by malicious individuals to perform a man-in-the-middle attack on a wireless network is:

  1. ARP cache poisoning

  2. amplified DNS attacks

  3. sessions hijacking

  4. creating an evil twin

Answer: A

Question No: 219 – (Topic 6)

A network administrator noticed that when one computer goes down, all the other computers in the office will not work. Which of the following topologies is in use?

  1. Star

  2. Ring

  3. Hybrid

  4. Bus

  5. Mesh

Answer: D

Question No: 220 – (Topic 6)

A technician is called to investigate a connectivity issue to a remote office that is connected by fiber optic cable. Using a light meter, it is determined that the Db loss is excessive. The installation has been working for several years. The switch was recently moved to the other

side of the room and a new patch cord installed. Which of the following is MOST likely the cause of the issue?

  1. Distance limitations

  2. Wavelength mismatch

  3. Bend radius limitation

  4. Dirty connectors

Answer: D

100% Dumps4cert Free Download!
Download Free Demo:N10-006 Demo PDF
100% Dumps4cert Pass Guaranteed!
N10-006 Dumps

Dumps4cert ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No