EnsurePass
2018 Jan Microsoft Official New Released 70-980
100% Free Download! 100% Pass Guaranteed!
http://www.EnsurePass.com/70-980.html

Recertification for MCSE: Server Infrastructure

Question No: 81 DRAG DROP – (Topic 7)

You need to delegate permissions for DETCA01.

Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Question No: 82 – (Topic 7)

You have a small Hyper-V cluster built on two hosts that run Windows Server 2012 R2 Hyper-V. You manage the virtual infrastructure by using System Center Virtual Machine Manager 2012.

Distributed Key Management is not installed. You have the following servers in the environment:

Ensurepass 2018 PDF and VCE

You have the following requirements:

-> You must back up virtual machines at the host level.

-> You must be able to back up virtual machines that are configured for live migration.

-> You must be able to restore the entire VMM infrastructure.

You need to design and implement the backup plan. What should you do?

  1. Run the following Windows PowerShell command:

    Get-VM VMM1 | Checkpoint-VM-SnapshotName 鈥淰MM backup鈥?/p>

  2. Run the following Windows PowerShell command:

    Set-DPMGlobalProperty-DPMServerName DPM1-KnownVMMServers VMM1

  3. Configure System State Backup for DCL.

  4. Configure backup for all disk volumes on FILESERVER1

Answer: B Explanation:

DPM can protect Hyper-V virtual machines V during live migration.

Connect servers-Run the the Set-DPMGlobalProperty PowerShell command to connect all the servers that are running Hyper-V to all the DPM servers. The cmdlet accepts

multiple DPM server names.

Set-DPMGlobalProperty -dpmservername lt;dpmservernamegt; -knownvmmservers

lt;vmmservernamegt;

Reference: Set up protection for live migration https://technet.microsoft.com/en-us/library/jj656643.aspx

Topic 8, Mix Questions

Question No: 83 – (Topic 8)

Your network contains a main data center and a disaster recovery data center. Each data center contains a Storage Area Network (SAN). The main data center contains a two-node failover cluster named Cluster1 that hosts a Microsoft SQL Server 2012 database named DB1.

The database files in DB1 are stored on the SAN in the main office. The disaster recovery data center contains a server that runs SQL Server 2012.

You need to recommend a disaster recovery solution for the SQL Server database. The solution must ensure that the database remains available if the main data center fails.

What should you recommend? More than one answer choice may achieve the goal. Select the BEST answer.

  1. Deploy Distributed File System (DFS) Replication.

  2. Extend the failover cluster to the disaster recovery data center.

  3. Implement a Cluster Shared Volume (CSV) and move the database files to the CSV.

  4. Implement SQL Server database replication between the two data centers.

Answer: D

Reference: http://technet.microsoft.com/en-us/library/ms151198.aspx

Question No: 84 – (Topic 8)

You have a server named Host1 that runs Windows Server 2012 and has the Hyper-V server role installed.

Host1 has one physical network adapter. You plan to deploy 15 virtual machines on Host1.

You need to implement a networking solution that ensures that all of the virtual machines use PXE to boot when they connect to Windows Deployment Server (WDS).

What should you do?

  1. Install legacy network adapters for each virtual machine.

  2. Modify the settings of the virtual switch.

  3. Modify the settings of the network adapter for each virtual machine.

  4. Install a second physical network adapter.

Answer: A

Explanation: Since Windows Server 2012 R2 (WS2012 R2) Hyper-V and Windows 8.1 Client Hyper-V, there are two generations of virtual machine hardware specification.

Generation 1 virtual machines (the only generation on legacy versions of Hyper-V) make things a little tricky when it comes to PXE booting. The default (and better performing) synthetic Network Adapter (that leverages the Hyper-V integration components) does not support booting off of the network in Generation 1 virtual machines. If you do want to boot this type of virtual hardware using PXE then you must add an emulated Legacy Network Adapter.

Reference: Boot a Hyper-V Virtual Machine Using PXE https://www.petri.com/boot-hyper-v-virtual-machine-using-pxe

Question No: 85 – (Topic 8)

Your network contains 10 servers that run Windows Server 2012. The servers have the Hyper-V server role installed. The servers host a Virtual Desktop Infrastructure (VDI) that contains persistent virtual machines. Each virtual machine is assigned to a specific user. Users can install software on their specific virtual machine.

You need to implement a solution to generate monthly reports that contain a list of all the installed software on the virtual machines. The solution must NOT require the installation of additional software on the virtual machines.

Which solution should you implement?

  1. A Microsoft System Center 2012 Configuration Manager software inventory

  2. A Microsoft System Center 2012 Configuration Manager hardware inventory

  3. Microsoft Assessment and Planning (MAP) Toolkit scans

  4. Microsoft Audit Collection Services (ACS) audit logs

Answer: C Explanation: Explanation:

Ensurepass 2018 PDF and VCE

t8 q111

Question No: 86 – (Topic 8)

Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2. All servers run Windows Server 2012 R2.

Server1 and Server2 have the Failover Clustering feature installed.

The servers are configured as nodes in a failover cluster named Cluster1. Cluster1 has access to four physical disks. The disks are configured as shown in the following table.

You need to ensure that all of the disks can be added to a Cluster Shared Volume (CSV).

Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)

  1. Enable BitLocker on Disk4.

  2. Disable BitLocker on Disk1.

  3. Format Disk2 to use NTFS.

  4. Format Disk3 to use NTFS.

Answer: C,D Explanation: Explanation:

You cannot use a disk for a CSV that is formatted with FAT, FAT32, or Resilient File System (ReFS).

Question No: 87 HOTSPOT – (Topic 8)

Your network contains an Active Directory forest named contoso.com. All servers run Windows Server 2012 R2. The forest contains two servers.

The servers are configured as shown in the following table.

Ensurepass 2018 PDF and VCE

You prepare the forest to support Workplace Join and you enable the Device Registration Service (DRS) on Server1.

You need to ensure that Workplace Join meets the following requirements:

-> Application access must be based on device claims.

-> Users who attempt to join their device to the workplace through Server2 must be prevented from locking out their Active Directory account due to invalid credentials.

Which cmdlet should you run to achieve each requirement? To answer, select the cmdlet for each requirement in the answer area.

Ensurepass 2018 PDF and VCE

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Question No: 88 – (Topic 8)

You have a Hyper-V host named Hyper1 that has Windows Server 2012 installed. Hyper1 hosts 20 virtual machines.

Hyper1 has one physical network adapter.

You need to implement a networking solution that evenly distributes the available bandwidth on Hyper1 to all of the virtual machines.

What should you modify?

  1. The settings of the virtual switch

  2. The settings of the virtual network adapter

  3. The Quality of Service (QoS) Packet Scheduler settings of the physical network adapter

  4. The settings of the legacy network adapter

Answer: A

Question No: 89 – (Topic 8)

Your network contains four servers. The servers are configured as shown in the following table.

Ensurepass 2018 PDF and VCE

You manage all of the servers and all of the clusters by using Microsoft System Center 2012 Virtual Machine Manager (VMM).

You plan to implement Dynamic Optimization for the virtual machines. You need to recommend a configuration for the planned implementation.

What should you recommend?

  1. Dynamic Optimization on Cluster3 and Cluster4 only Virtual machines that are balanced across the clusters

  2. Dynamic Optimization on all of the clusters

    Virtual machines that are balanced across the nodes in the clusters

  3. Dynamic Optimization on all of the clusters

    Virtual machines that are balanced across the clusters

  4. Dynamic Optimization on Cluster1 and Cluster2 only

Virtual machines that are balanced across the nodes in the clusters

Answer: B Explanation:

http://technet.microsoft.com/en-us/library/gg675109.aspx

Ensurepass 2018 PDF and VCE

t8 q122-2

Reference: http://searchsystemschannel.techtarget.com/feature/Using-Microsoft-Cluster-

Services-for-virtualmachineclustering t8 q122-3

Question No: 90 – (Topic 8)

Your network contains an Active Directory domain named contoso.com. The domain contains Server 2012 R2 and has the Hyper-V server role installed.

You need to log the amount of system resources used by each virtual machine. What should you do?

  1. From Windows PowerShell, run the Enable-VMResourceMetering cmdlet.

  2. From Windows System Resource Manager, enable Accounting.

  3. From Windows System Resource Manager, add a resource allocation policy.

  4. From Windows PowerShell, run the Measure-VM cmdlet.

Answer: A Explanation:

The Enable-VMResourceMetering cmdlet collects resource utilization data for a virtual machine or resource pool.

100% Free Download!
Download Free Demo:70-980 Demo PDF
100% Pass Guaranteed!
Download 2018 EnsurePass 70-980 Full Exam PDF and VCE

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2018 EnsurePass IT Certification PDF and VCE