Dumps4cert.com : Latest Dumps with PDF and VCE Files
2018 Jan Microsoft Official New Released 70-680
100% Free Download! 100% Pass Guaranteed!
http://www.Dumps4cert.com/70-680.html

TS: Windows 7, Configuring

Question No: 141 – (Topic 2)

You have two computers on the same subnet. The computers have the IPv6 addresses shown in the following table.

Dumps4Cert 2018 PDF and VCE

You need to test the connection to the IPv6 address from Computer1 to Computer2. Which command should you run?

A. Ping -6 fe80::44df:1b68 B. Ping -6 fe80::44df:1b68 C. Ping -R fe80::44df:1b68 D. Ping -R fe80::44df:1b68

Answer: B Explanation: 1073 40112

If you are pinging from one host to another using link-local addresses, you also need to include your interface ID, for example ping

fe80::39cd:4c93.

The % character followed by a number after each IPv6 address is the interface ID.

If you want to display the configuration of the IPv6 interfaces on the local computer, you can enter netsh interface ipv6 show address.

Ping -6

Force using IPv6.

Question No: 142 – (Topic 2)

You have a virtual hard disk (VHD) file.

You need to view the files in the VHD. The solution must prevent users that log on to What should you do?

  1. From Disk Management, Attach VHD as read only.

  2. From Disk Management, Convert the VHD to GPT disk.

  3. From Windows Explorer, modify the permissions of the VHD file.

  4. From Windows Explorer, modify the read-only attribute of the VHD file.

Answer: C

Question No: 143 – (Topic 2)

You have a computer that runs Windows 7.

You need to identify which applications were installed during the last week. What should you do?

  1. From Reliability Monitor, review the informational events.

  2. From System Information, review the Software Environment.

  3. From Performance Monitor, review the System Diagnostics Report.

  4. From Performance Monitor, run the System Performance Data Collector Set.

Answer: A Explanation:

Reliability Monitor tracks a computer’s stability. It can also tell you when events that could affect stability (such as the installation of a software application) occurred and whether any restarts were required after these events. Action Center monitors your computer and reports problems with security, maintenance, and related settings. The Windows Experience Index indicates the suitability of your current computer hardware for running resource intensive applications.

Dumps4Cert 2018 PDF and VCE

Question No: 144 – (Topic 2)

To establish a DirectAccess connection to the network, what is the first requirement?

  1. Install a certificate

  2. Create a VPN connection

  3. A static IPv4 address

  4. A static IPv6 address

Answer: D

Question No: 145 – (Topic 2)

You have a computer that runs Windows 7. The computer contains one hard disk. The hard disk is configured as shown in the following table.

Dumps4Cert 2018 PDF and VCE

You install a new 250-GB hard disk in the computer.

You need to ensure that all the files on the computer are available if a single disk fails. What should you do?

  1. Create a mount point on C and D and then create a striped volume.

  2. Create a mount point on C and D and then create two striped volumes.

  3. Convert both disks to dynamic disks and then create a mirrored volume.

  4. Convert both disks to dynamic disks and then create two mirrored volumes.

Answer: D

Explanation:

Creating a Mirrored Volume (RAID-1)A mirrored or RAID-1 volume provides availability and fault tolerance but does not improve performance. It uses two disks (or two portions on separate disks) that are the same size. Any changes made to the first disk of a mirror set are also made to its mirror disk. If the first disk fails, the mirror is broken and the second disk is used until the first is repaired or replaced. The mirror is then re-created, and the information on the working disk is mirrored on the repaired disk. The disadvantage of

RAID-1 is that you need (for example) two 200-GB disks to hold 200 GB of data. The advantage is that you can mirror a system disk containing your operating system.You create a mirrored volume using a very similar procedure to the one that creates a striped volume, except that you right-click the first disk of your mirror and click New Mirrored Volume to start the appropriate wizard. You then select the second disk. The second disk needs to have a portion of unallocated space that is at least as large as the disk you want to mirror. The drive letter for a mirrored volume is the same as the drive letter of the first disk.

You can also use the Diskpart tool to create a mirrored volume. At the DISKPARTgt; prompt you first use the select disk command to select the first disk. You then enter a command with the syntax add disk=lt;ngt;to specify the mirror disk.

Question No: 146 – (Topic 2)

You have a computer that runs Windows 7.

You need to identify which hardware is required to create a system repair disc. What hardware should you indentify?

  1. CD/DVD burner.

  2. Floppy disk.

  3. Tape drive.

  4. USB disk.

Answer: A

Question No: 147 – (Topic 2)

Kim Akers has an administrator account on a computer running Windows 7 Enterprise.

Don Hall has a standard account on the same computer. Both users have Microsoft Office Word and Microsoft Office Excel files saved in their Documents library. Don stores Microsoft Office PowerPoint presentations in a subfolder of his Documents library named Presentations. He also stores digital photographs in his Pictures library.

Don has created a folder called Secret in his Documents library and has encrypted the folder and its contents. He stores confidential files in that folder.

When Don last logged on, he deleted some personal files but did not empty his Recycle Bin.

Kim is logged on to the computer. She has plugged in a USB flash memory device that holds personal files but has not yet copied any of these files to the computer. She has never formatted the flash memory device.

The computer is configured to let Windows decide what files and folders to back up.

Kim opens the Backup And Restore console but does not change any settings. She clicks Backup Now.

Which files are backed up? (Choose all that apply.)

  1. The Word and Excel files in Don#39;s Documents library

  2. The Word and Excel files in Kim#39;s Documents library

  3. The PowerPoint files in Don#39;s Presentation folder

  4. The digital photographs in Don#39;s Pictures library

  5. The files in Don#39;s Secret folder

  6. The files in Don#39;s Recycle Bin

  7. The files on Kim#39;s USB flash memory device

Answer: A,B,C,D

Question No: 148 – (Topic 2)

You have a computer that runs Windows 7. The computer is joined to a domain. You need to ensure that only approved USB drives can be used on the computer.

Which two policy settings should you configure? (Each correct answer presents part of the solution. Choose two.)

  1. Enable Prevent installation of removable devices.

  2. Enable Prevent installation of devices not described by other policy settings.

  3. Enable Prevent installation of devices that match any of these device IDs and enter the device ID for the approved USB drives.

  4. Enable Allow installation of devices that match any of these device IDs and enter the device ID for the approved USB drives.

Answer: B,D

Question No: 149 – (Topic 2)

You are deciding on which storage devices you want to configure system protection. System protection is enabled by default on your C: drive, which holds your system files. No other storage device on your computer has system protection enabled.

On which of the following storage devices can you enable system protection? (Choose all that apply.)

  1. Your second internal hard disk, formatted with NTFS

  2. An external USB hard disk formatted with FAT

  3. A USB flash drive

  4. Your optical drive

  5. A mounted VHD created on your second internal hard disk

Answer: A,E

Question No: 150 – (Topic 2)

You have a computer that runs Windows 7.

You need to copy files to a virtual hard disk (VHD) file. What should you do first?

  1. Run Dism.exe and specify the /image and /online parameters.

  2. Open Windows Explorer, right-click the VHD file and select Open.

  3. Run Diskpart.exe and then run the Select and Attach commands.

  4. Run Imagex.exe and specify the /mountrw and /append parameters.

Answer: C Explanation:

DiskpartMicrosoft command-line tool Diskpart is used to create and format volumes on the target computer.SelectShift the focus to an object.AttachAttaches a virtual disk file.

100% Dumps4cert Free Download!
Download Free Demo:70-680 Demo PDF
100% Dumps4cert Free Guaranteed!
Download 2018 Dumps4cert 70-680 Full Exam PDF and VCE

Dumps4cert ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No