Dumps4cert.com : Latest Dumps with PDF and VCE Files
2018 Jan IBM Official New Released C2180-401
100% Free Download! 100% Pass Guaranteed!
http://www.Dumps4cert.com/C2180-401.html

IBM WebSphere Application Server Network Deployment V8.5.5 and Liberty Profile, System Administration

Question No: 1

A developer created an enterprise application which contained data source and security role information. The developer asked a system administrator to install this application to an application server where global security is enabled using the Integrated Solutions Console (ISC). A new data source was configured at the server scope for the use of this application. While load testing the application, the developer noticed that the attributes configured on the new data source were ignored by the application server.

How can the administrator ensure that the attributes configured on the new data source are used by the application server?

  1. Create the data source under cell scope instead of server scope.

  2. Delete any data source of the same name defined under node, cluster or cell scope.

  3. Reinstall the application and clear the Process embedded configuration check box.

  4. Correct the component-managed and container-managed authentication aliases set on the data source.

Answer: D

Question No: 2

A web application has a configured session timeout of eight hours and a default LTPA token timeout of two hours. After every two hours, the users have to log in again from their HTTP browser. The system administrator is required to make configuration changes so users only have to log in once, while keeping the above-mentioned timeouts the same. The authentication mechanism available is Kerberos.

How should the administrator do this?

  1. Configure the SIP digest authentication.

  2. Configure the SPNEGO Web or SPNEGO TAI.

  3. Enable Session Management Security Integration.

  4. Ensure Web Inbound security attribute propagation is enabled.

Answer: A

Question No: 3

The installation of WebSphere Application Server did not complete successfully, and a system administrator needs to troubleshoot the installation.

What can the administrator do to identify the cause of the installation failure?

  1. Run the installer command with the appropriate command line options.

  2. Check the files under the Agent data location of IBM Installation Manager.

  3. Check the files under the logs directory of IBM Installation Manager installation directory.

  4. Check the log.txt under lt;WebSphere Application Server install directorygt;lt;log directorygt;.

Answer: D

Question No: 4

A system administrator is required to create a star topology for multi-cell performance management for three WebSphere Application Server cells.

How should the administrator configure the Application Placement Controller (APC) in a star topology?

Configure the cell custom property Center Cell to:

  1. False in all three WebSphere Application Server cells.

  2. False in one WebSphere Application Server cell Truein the other two WebSphere Application Server cells.

  3. True in all three WebSphere Application Server cells.

  4. True in one WebSphere Application Server cell

False in the other two WebSphere Application Server cells.

Answer: D

Reference:http://www- 01.ibm.com/support/knowledgecenter/SSEQTP_8.5.5/com.ibm.websphere.nd.multiplatform

.doc/ae/twve_mcpconfig.html

Question No: 5

Within a WebSphere Application Server Network Deployment cell, a system administrator

needs to write a script to determine if a particular server is stopped. It is important that the wsadmin script explicitly return a status of stopped as opposed to just failing.

What wsadmin object should the administrator use to write this script?

  1. AdminApp

  2. AdminTask

  3. AdminConfig

  4. AdminControl

Answer: D

Reference:http://www- 01.ibm.com/support/knowledgecenter/SSAW57_8.0.0/com.ibm.websphere.nd.doc/info/ae/a e/welc6topscripting.html

Question No: 6

A system administrator runs a Python script that creates and configures several servers and realizes that the script fails before completing. Although many tasks succeeded, they are rolled back when the script fails.

Before running the script again, what can the administrator add to the script after each task so the completed tasks are committed even if other tasks fail?

  1. AdminApp.update ()

  2. AdminConfig.save()

  3. C. AdminControl.invoke(server, #39;sync’)

  4. AdminTask.backupJobManager(#39;server#39;)

Answer: C

Question No: 7

An application contains a web services client and the application is deployed and running. A system administrator has to add a response timeout to the deployed web services client, so the call fails in a timely fashion.

Which artifact should the administrator use?

  1. web.xml

  2. was-webservices-sca.xml

  3. ibm-webservices-bnd.xmi

  4. ibm-webservicesclient-bnd.xmi

Answer: C

Reference:http://www- 01.ibm.com/support/knowledgecenter/SSEQTP_7.0.0/com.ibm.websphere.nd.doc/info/ae/a e/twbs_atkdd2.html

Question No: 8

A system administrator has installed WebSphere Application Server Network Deployment V8.5.5 using the silent installation process and needs to verify that the installation completed successfully.

What does the administrator need to do to verify a successful installation?

  1. Launch the Installation Manager GUI, and verify the installation by going to File -gt; View Installed Packages.

  2. Run the command IBMIM list installed Packages and check that the appropriate WebSphere Application Server package is listed.

  3. Check for INSTCONFSUCCESS message at the end of the lt;webSphere Application Server install directorygt;lt;log directorygt;log.txt file.

  4. Use the installer command to compare the checksum of the product file to the correct checksum value in the bill-of-materials file and make sure that the checksums match.

Answer: C

Reference:http://www- 01.ibm.com/support/knowledgecenter/SSAW57_7.0.0/com.ibm.websphere.installation.nd.d oc/info/ae/ae/tins_trouble.html?cp=SSAW57_7.0.0/1-5-0-7

Question No: 9

The computer where a federated node was running had a failure and cannot be recovered. A system administrator wants to recreate the node with the same configurations in another computer.

Which steps should the administrator execute in order to recover the damaged node?

  1. Configure the new computer with a different hostname. Create a custom profile with the same name.

    Federate to the cell using the command addNode with the default options.

  2. Configure the new computer with a different hostname. Create a custom profile with a different name.

    Federate to the cell using the command addNode with the option -asExistingNode.

  3. Configure the new computer with the same hostname. Create a custom profile with the same name.

    Federate to the cell using the command addNode with the option -asExistingNode.

  4. Configure the new computer with the same hostname. Create a custom profile with the same name.

Federate to the cell using the command addNode with the options -includeapps.

Answer: B

Reference:http://www- 01.ibm.com/support/knowledgecenter/SSD28V_8.5.5/com.ibm.websphere.zseries.doc/ae/t agt_addNode_asExistingNode.html(See the Heading Procedure).

Question No: 10

A system administrator ran the backup Config command to backup the configuration using the -nostop option. The administrator changed the properties for the service integration environment by modifying the sib.properties file. During testing the administrator noticed Service Integration Bus related errors and wanted to restore the service integration environment. The administrator used the restore config command, but the tuning properties for the service integration environment were not restored.

How can the administrator prevent this issue?

  1. Use full repository checkpoints for both the backup and the restore.

  2. Use the restore config command with -nostop for the restore.

  3. Use the manage profiles command for both the backup and the restore.

  4. Use the backup config command without -nostop for the backup Use the restore config

command without -nostop for the restore.

Answer: B

100% Dumps4cert Free Download!
Download Free Demo:C2180-401 Demo PDF
100% Dumps4cert Free Guaranteed!
Download 2018 Dumps4cert C2180-401 Full Exam PDF and VCE

Dumps4cert ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No