OEM Preinstallation for Windows 10
Question No: 1
You prepare and sell several computers pre-installed with Windows.
You need to identify the scenarios that violate the support agreement between the OEM System Builder and an end user that purchases a computer.
Which two scenarios violate the support agreement?
When an end user replaces the network card, video card, and power supply for the computer.
When an end user runs a Push Button Reset (PBR).
When an end user adds three hard disks on the computer.
When an end user moves the computer’s hard disks to another computer and uses the new computer.
When an end user replaces the computer’s motherboard with another manufacturer’s motherboard.
Question No: 2
You plan to capture a Windows reference installation. The reference installation contains several third-party drivers for USB devices.
You need to ensure that the third-party device drivers are preserved in the captured Windows image.
Which component should you configure in the answer file?
Question No: 3
You have several servers that have the following hardware installed: You plan to install Windows Server 2012 on the servers.
You need to identify which hardware component must be replaced before the planned installation.
Which hardware component should you identify?
the x86 processor and motherboard
The 2 GB of Physical memory
the network card
the 100-GB hard disk drive
Question No: 4
You plan to install operating systems on 500 client computers by using the sources files located in a network share.
You need to identify which operating system must be installed on the computer that hosts the share. The solution must ensure that 25 computers can correct concurrently to the share.
Which two possible operating systems achieve this goal? Each correct answer presents a complete solution.
Windows Server 2008 R2 Standard
Windows 10 Pro
Windows 7 Ultimate
Windows 8 Enterprise
Windows Server 2012 Standard
Question No: 5
A technician applies an image of Windows to a client computer.
The technician reports that several errors occurred during the Windows Welcome phase of the setup.
You need to view the errors that occurred during Windows Welcome. Which file should you view?
Answer: D Explanation:
Question No: 6
You work for an OEM system builder.
You use Windows Deployment Services (WDS) to deploy operating system images. WDS contains a 32-bit boot image.
You receive a new client computer model that is 64-bit. You add a 64-bit install image of Windows to WDS.
You attempt to deploy the new install image to the new computer model by using WDS. The boot image loads on the new computer, but you fail to apply the install image.
You discover that from the boot image on the new computer, you cannot connect to the WDS server.
You need to ensure that you can deploy the new install image to the new computer model. What should you do?
Inject the 64-bit driver for the network adapter into the install image.
Inject the 32-bit driver for the network adapter into the boot image.
Inject the 64-bit driver for the network adapter into the boot image.
Inject the 32-bit driver for the network adapter into the install image.
Question No: 7
You work for an OEM builder.
You create a custom image of Windows 10 for a customer. You deploy the image to 100 clients that are then shipped to a customer.
For recovery purposes, the customer requests that you provide removable media that contains the image.
What should you do?
Create an image of a reference computer on a USB key by using a third-party imaging software.
Inform the customer that the customer must download the custom image from the Microsoft Volume Licensing Service Center (VLSC).
Create an image of a reference computer on a DVD by using a third-party imaging software.
Inform the customer that you are prohibited from providing a recovery solution for the custom image on removable media.
Answer: D Explanation:
You can provide a hard disk recovery solution for a custom image, but not removable media containing a custom image.
Question No: 8
You are preparing the hard disk drive for a Unified Extensible Firmware Interface (UEFI)- based computer.
You start computer from a Windows Preinstallation Environment (Windows PE) environment.
You need to ensure that you can start Windows from the hard disk drive. Which command should you use?
Answer: C Explanation:
You need to create a GPT formatted drive.
Question No: 9 HOTSPOT
You have a Windows image named Image1.wim.
You plan to deploy Image1.win to computers that have built-in video cameras. The driver for the cameras in missing from Image1.wim.
You obtain a driver package from the manufacturer of the cameras. You store the driver package and the driver.inf setup information file C:\Driver.
You mount Image1.wim to C:\Mount.
You need to inject the driver into the image.
Which command should you run? To answer, select the appropriate options to complete the command.
Question No: 10
You work for an OEM system builder named Fabrikam, Inc.
You plan to deploy Windows by running setup.exe and an answer file. You need to configure the answer file to perform the following:
Which two possible configuration passes can you use to achieve this goal? Each correct answer presents a complete solution.
Answer: B,D Explanation:
100% Free Download!
–Download Free Demo:70-734 Demo PDF
100% Pass Guaranteed!
–Download 2018 Dumps4cert 70-734 Full Exam PDF and VCE
|Lowest Price Guarantee||Yes||No||No|
|Free VCE Simulator||Yes||No||No|