Ensurepass.com : Ensure you pass the IT Exams
2018 Aug Cisco Official New Released 500-202
100% Free Download! 100% Pass Guaranteed!

CCIE Data Center (v2.0)

Question No: 221 DRAG DROP – (Topic 2)

An admin is updating an existing Cisco UCS environment to accommodate a new storage array that will be directly attached to the Cisco UCS.

Unmanaged servers external to the Cisco UCS fabric interconnects will also access the new array existing Cisco UCS service profiles will be used to access the new storage array.

Drag and drop the appropriate steps from left into the correct order on the right to migrate the Cisco UCS to support the new storage array.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation: Configure UCS into FC Switching Mode Configure Storage Port on UCS

Configure Zoning on upstream switch

Create/Configure LUN Masking on Storage Array

The general process to configure DAS in UCS is:

-> Configure FI in FC switch mode.

-> Create required virtual SAN (VSAN).

-> Set the port role in UCS.

-> Check if the storage port worldwide port name (WWPN) is logged in to the fabric.

Ref:http://www.cisco.com/c/en/us/support/docs/servers-unified-computing/ucs- infrastructure-ucs-manager-software/116082-config-ucs-das-00.html

Question No: 222 – (Topic 2)

Which statement about NPV on the Cisco Nexus 5000 Series Switches is true?

  1. By default, Cisco Nexus 5000 Series Switches operate in NPV mode.In this mode, the switch provides standard Fibre Channel switching.

  2. In NPV mode, each switch that joins a SAN is assigned a domain ID.Each SAN (or VSAN) supports a maximum of 239 domain IDs, so the SAN has a limit of 239 switches.

  3. In NPV mode, the edge switch relays all traffic from server-side sports to the core switch.The core switch provides TE Port functionality to the downstream NPV switch.

  4. In NPV mode, the edge switch appears as a Fibre Channel host to the core switch and as a regular Fibre Channel switch to its connected devices.

Answer: D

Question No: 223 – (Topic 2)

Which three statements about the Cisco Fibre Channel Domain feature are true? (Choose threE.

  1. It is responsible for domain ID distribution.

  2. It is responsible for fabric reconfiguration.

  3. The domains are configured on a switch-wide basis.

  4. It functions as described in the FC-EE standards.

  5. It acts as relay agent for the FC ID allocations that are distributed by the Fibre Channel Time Server(ff.ff.fB.

  6. It is responsible for principal switch selection. Answer: A,B,F

Question No: 224 – (Topic 2)

Which option is the benefit of Cisco ACE solution?

  1. minimum scalability for application delivery

  2. infrastructure simplification

  3. centralized management for all application teams

  4. completely isolated from network thus providing easy management

Answer: B Explanation:

Refhttp://www.cisco.com/c/en/us/products/collateral/interfaces-modules/ace-application- control-engine-module/prod_white_paper0900aecd80458698.html

Question No: 225 – (Topic 2)

Refer to the exhibit,

Ensurepass 2018 PDF and VCE

which two statements about the HSRPV6 implementation for company ABC are true? (Choose two)

  1. HSRP version #1 or #2 is supported.

  2. The UDP port is port 2029.

  3. The virtual MAC address range is 0005.73A0.0FFF.

  4. The hop limit is set to 127.

  5. The multicast link-local IP destination address is FF08::66. Answer: B,C

Question No: 226 – (Topic 2)

Which three configurations can be different between EVPN vPC peers? (Choose 3)

  1. using a different secondary IP address

  2. loopback primary IP address

  3. using the same primary IP addresses

  4. consistent NVE1 binding to the same loopback interface

  5. consistent VLAN to VN-segment mapping

  6. consistent VNI to group mapping

Answer: D,E,F

Question No: 227 – (Topic 2)

Which configuration shows the correct method to correct unified ports in a Cisco nexus 5500 switch?

  1. nexus5500# configure terminal nexus5500 (config)# slot 1

    nexus5500 (config-slot)# port 32 type fc

    nexus5500 (config-slot)# copy running-config startup-config nexus5500 (config-slot)# reload

  2. nexus5500# configure terminal nexus5500 (config)# slot 1 nexus5500 (config)# port 32 type fc

    nexus5500 (config)# copy running-config startup-config nexus5500 (config)# reload

  3. nexus5500# configure terminal nexus5500 (config)# slot 1

    nexus5500 (config-slot)# port 32 type fc

  4. nexus5500# configure terminal nexus5500 (config)# slot 1

nexus5500 (config-slot)# port 32 type unified

nexus5500 (config-slot)# copy running-config startup-config nexus5500 (config-slot)# reload

Answer: A Explanation:

Ref:http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/layer2/513_n 1_1/b_Cisco_n5k_layer2_config_gd_rel_513_N1_1/b_Cisco_n5k_layer2_config_gd_rel_51 3_N1_1_chapter_011.html#task_A6C551C739324293B020FD7C35F018D0

Question No: 228 – (Topic 2)

Which two statements about basic zoning are true? (Choose two)

  1. If a zone is part of multiple zone setsyou create one instance of this zone for both zone sets.

  2. To retrieve the results of the activation on a per switch basis. The managing switch provides a combined status about the activation and identifies the failure switch.

  3. Administrators can make simultaneous configuration changes. Upon activation.one administrator can overwrite another administrator#39;s changes.

  4. The default zone policy is defined per switch. To ensure smooth fabric operation, all switches in the fabric must have the same default zone setting

  5. To distribute the zoning database, you must reactivate the same zone set. The reactivation may affect hardware changes for hard zoning only on the local switch, remote switch, remote switches are not affected.

Answer: C,D

Question No: 229 – (Topic 2)

Which two actions are necessary to configure FCoE on the Cisco Nexus 7000 Switches?(choose two)

  1. The dedicated and shared interfaces are configured.

  2. The system quality of service is disabled.

  3. The module is licensed for Layer 2 and Layer 3.

  4. The Cisco Nexus 7000 has the FCoE feature enabled.

  5. The two required storage virtual contexts are created. Answer: A,D

Question No: 230 DRAG DROP – (Topic 2)

Drag and drops the feature from the left onto the correct description on the right

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

100% Ensurepass Free Download!
500-202 PDF
100% Ensurepass Free Guaranteed!
500-202 Dumps

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No