Ensurepass.com : Ensure you pass the IT Exams
2018 Aug Cisco Official New Released 500-201
100% Free Download! 100% Pass Guaranteed!

CCIE Data Center (v2.0)

Question No: 251 – (Topic 2)

Refer to exhibit.

Ensurepass 2018 PDF and VCE

Which two statements are true?(Choose two)

C:\Users\Raiy\Pictures\40.jpg

  1. Four port channels are configured and they all are up.

  2. Two appliance ports are configured.

  3. One port is not configured.

  4. No uplinks ports are configured.

  5. No Server ports are configured. Answer: C,D

Question No: 252 – (Topic 2)

Which three statements best describe multicast operation on Cisco Nexus switches in a data center? (Choose three.)

  1. Cisco NX-OS Software does not support PIM dense mode.

  2. The command ip multicast-routing must be enabled in Cisco NX-OS Software before any multicast configuration is possible on the switch.

  3. PIM CLI configuration and verification commands are not available until you enable the PIM feature with the feature pim command.

  4. Cisco NX-OS Software supports multicast routing per Layer 3 VRF instance.

  5. The default PIM operational mode on the Cisco Nexus 7000 switch is SSM.

Answer: A,C,D

Question No: 253 – (Topic 2)

Which three commands must be run to enable support of adapter-fex on an interface on Cisco Nexus Switch?

(Choose 3)

  1. feature adapter-fex

  2. feature-set adapter-fex

  3. feature-set virtualization

  4. feature fex

  5. switchport mode adapter-fex

  6. switchport mode vntag

Answer: A,C,F

Question No: 254 – (Topic 2)

Which two statements about VLAN Trunking Protocol are true? (Choose 2)

  1. VIAN Trunking Protocol is a Layer 2 messaging protocol that maintains VLAN consistency by managing the addition, deletion, and renaming of VLANs within a VLAN Trunking Protocol domain.

  2. On Cisco Nexus switches, VLAN Trunking Protocol is enabled by default.

  3. Layer 2 trunk interfaces, Layer 2 port channels, and virtual port channels support VLAN Trunking Protocol functionality.

  4. VLAN Trunking Protocol is only supported on Layer 2 trunk interfaces.

  5. VLAN Trunking Protocol is a Layer 2 messaging protocol that maintains the interface VLAN configuring within a VLAN Trunking Protocol domain.

Answer: A,C

Topic 3, Exam Pool C

Question No: 255 – (Topic 3)

Which two statements about the Cisco Fibre Channel Domain feature and persistent FC IDs are true? (Choose two)

  1. Entries that the switch has learned must be manually acknowledged to be stored in the FCDomian FCID database

  2. The current FC IDs in use the fcdomain are saved across reboots

  3. If you connect to the switch from a Windows host, be sure to enable the persistent FC ID feature in the VSAN that connects these hosts

  4. When persistent FC IDs are enabled, FC IDs cannot be changed after a reboot

  5. A persistent FC ID that is assigned to an F Port cannot be moved across interfaces if the same persistent FC ID is to be maintained

Answer: B,E

Question No: 256 – (Topic 3)

To test the API in web-browser, which command must you configure to enable the feature API sandbox on the Cisco Nexus Platform running NX-OS?

  1. switch(config)#feature nxos-api switch(config)#nxos-api sandbox

  2. switch(config)#feature api switch(config)#api sandbox

  3. switch(config)#feature nxapi switch(config)#nxapi sandbox

  4. switch(config)#feature nx-api switch(config)#nx-api sandbox

Answer: C

Question No: 257 – (Topic 3)

Which programming language is used to write custom workflow code in Cisco UCS Director?

  1. Python

  2. Bash script

  3. Java script

  4. Java

Answer: C

Question No: 258 – (Topic 3)

Refer to the exhibit.

Ensurepass 2018 PDF and VCE

Which option describes the main purpose of the XML message

  1. Create a new port group profile

  2. Modify an existing port group profile

  3. Shut down an existing port group profile

  4. Delete an existing port group profile

Answer: A

Question No: 259 – (Topic 3)

Refer to the exhibit.

Ensurepass 2018 PDF and VCE

Sometime ago you enabled statistics collection with the internal stats database and received a report that the /bootflash partition is full. Which two options to resolve the issue are true? (Choose two.)

  1. Add logical volume to LogicalVol01.

  2. Stop pmon and drop PostgreSQL DB.

  3. Configure external statistics DB.

  4. Unmount and format /bootflash.

  5. Add additional physical volume to VolGroup01.

Answer: B,C

Question No: 260 – (Topic 3)

Refer to the exhibit,

Ensurepass 2018 PDF and VCE

this output is observed when the troubleshooting a blade that is unable to boot from SAN

which action must the cisco UCS administrator take to resolve the issue?

  1. Check iSCSI intiator group pool

  2. Check the LUN masking coonfiguration on the storage on array

  3. Enable NPv on the fiber channel switch

  4. enable on the fiber channel switch

  5. Check the boot Lun ID cisco UCS boot order

  6. Check zoning configuration on the fiber channel switch

Answer: B

100% Ensurepass Free Download!
–500-201 PDF
100% Ensurepass Free Guaranteed!
–500-201 Dumps

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No