Ensurepass.com : Ensure you pass the IT Exams
2018 Aug Cisco Official New Released 400-201
100% Free Download! 100% Pass Guaranteed!

CCIE Data Center (v2.0)

Question No: 21 – (Topic 1)

Refer to the exhibit.

Ensurepass 2018 PDF and VCE

Which option describes when this server reboots?

  1. When the vnic/vhba placement is changed

  2. When the schedule is set to occur

  3. When the user acknowledges the reboot

  4. immediately after the next change

Answer: A

Question No: 22 – (Topic 1)

Which Cisco UCS Director feature enables you to view the REST API URL for every report displayed in Cisco UCS Director?

  1. report metadata

  2. orchestration feature set

  3. REST API Browser

  4. automation feature set

Answer: A

Question No: 23 – (Topic 1)

You want to create two vHBAs per fabric for each server in a Cisco UCS domain. Which option lists the maximum number of servers that can be utilized in this domain?

  1. 20 chassis (160 servers)

  2. 15 chassis (120 servers)

  3. 16 chassis (128 servers)

  4. 12 chassis (96 servers)

Answer: A

Question No: 24 – (Topic 1)

Refer to the exhibit.

Ensurepass 2018 PDF and VCE

The L4-L7 Services were configured in the APIC, but you see this fault under Service Graph. Which action is the bestway to resolve the problem?

  1. Reset the NetScaler load balancer.

  2. This is a configuration issue. Make sure that unicast routing is enabled on the bridge domain that is associated with the interfaces that connected to the Citrix load balancer.

  3. Delete the service graph and create it again

  4. Reimport the device package

Answer: B

Question No: 25 – (Topic 1)

Which two statements about IP-directed broadcast are true? (Choose two.)

  1. An IP-directed broadcast is an IP packet whose destination address is a valid broadcast address, and it originates from a node that is also part of the same subnet.

  2. A switch that is not directly connected to its destination subnet forwards an IP-directed broadcast in the same way it forwards unicast IP packets destined to a host on that subnet.

  3. All switches in the network forward an IP-directed broadcast in the same way they forward multicast IP packets.

  4. The destination address in the IP header of the packet is rewritten to the configured IP broadcast address for the subnet, and the packet is sent as a link-layer broadcast.

Answer: A,D

Question No: 26 – (Topic 1)

Which two options are functions of the 6LoWPAN header? (Choose two)

  1. IPv6 header compression

  2. cyclic redundancy check

  3. limit the lifespan of a packet (TTL)

  4. Layer 2 encryption

  5. packet fragmentation and reassembly

Answer: A,E

Question No: 27 – (Topic 1)

Which option lists the contents of the NSH header in service function chaining?

  1. base header, service path header, and context header

  2. network header, service header, and transport header

  3. base header, transport header, and optional header

  4. Ethernet header, transport header, and application header

Answer: A

Question No: 28 – (Topic 1)

You configured a Cisco usNIC connectivity policy, for a HPC environment. Which action also must be completed?

  1. Download and compile the ring_c application.

  2. Install the Intel MPI library environment.

  3. Mount the MPI adapter in the operating system.

  4. Install an MPI environment in the operating system.

Answer: A

Question No: 29 – (Topic 1)

After VTEP devices have established BGP neighbor adjacencies with other VTEPs or with Internal BGP route reflectors, which three pieces of information are exchanged through BGP? (Choose three.)

  1. Layer 3 VNI

  2. VTEP peer list

  3. VPNv4 prefixes

  4. VTEP address

  5. router MAC address

Answer: A,D,E

Question No: 30 – (Topic 1)

You want to make 80 Gbps of bandwidth available to your RedHat servers. Which two statements are true? (Choose two.)

  1. Install 2208 lOMs, VIC 1280 CNAs, fabric extenders, and create four vNICs mapped to each fabric.

  2. Install 2204 lOMs, VIC1280 CNAs, fabric extenders, and create four vNICs mapped to each fabric.

  3. Install 2204 lOMs, V1C1240 CNAs, and create four vNICs mapped to each fabric.

  4. Install 2204 IOMs, VIC 1280 CNAs, and create four vNICs mapped to each fabric.

  5. Install 2204 lOMs, VIC 1240 CNAs, fabric extenders, and create four vNICs mapped to each fabric.

  6. Install 2208 IOMs, VIC 1280 CNAs, fabric extenders, and create eight vNICs mapped to each fabric.

Answer: C,F

100% Ensurepass Free Download!
400-201 PDF
100% Ensurepass Free Guaranteed!
400-201 Dumps

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No