Dumps4cert.com : Latest Dumps with PDF and VCE Files
2018 Aug Microsoft Official New Released 70-765
100% Free Download! 100% Pass Guaranteed!

Advanced Solutions of Microsoft Exchange Server 2013

Question No: 71 – (Topic 6)

You have an Exchange Server 2013 organization.

You create a data loss prevention (DLP) policy. The mode of the DLP policy is set to Enforce.

You need to ensure that email messages containing social security numbers from the United States are blocked.

Which two possible rules achieve this goal? (Each correct answer presents a complete solution. Choose two.)

  1. U.S. State Breach: Allow Override

  2. U.S. State Breach: Scan email sent outside – low count

  3. U.S. State Breach: Scan email sent outside – high count

  4. U.S. State Breach: Scan text limit exceeded

  5. U.S. State Breach: Attachment not supported

Answer: B,C Explanation: Note:

  • In Microsoft Exchange Server 2013, you can use data loss prevention (DLP) policy templates to help meet the messaging policy and compliance needs of your organization.

    that is associated with several common legal and regulatory requirements.

  • DLP policy templates in Exchange include:

    U.S. State Breach Notification Laws

    Helps detect the presence of information subject to U.S. State Breach Notification Laws, including data like social security and credit card numbers.

    Question No: 72 HOTSPOT – (Topic 6)

    You have an Exchange Server 2013 organization.

    You run Get-OutlookAnywhere -Server EX1 | fl and you receive the following output.

    Dumps4Cert 2018 PDF and VCE

    Use the drop-down menus to select the answer choice that completes each statement.

    Dumps4Cert 2018 PDF and VCE

    Answer:

    Dumps4Cert 2018 PDF and VCE

    Explanation:

    Dumps4Cert 2018 PDF and VCE

    Box 1: ExternalClientAuthenticationMethod: Basic ExternalClientRequiresSsl: True

    Dumps4Cert 2018 PDF and VCE

    Box 2: InternalClientAuthenticationMethod: Ntlm InternalClientRequiresSsl: False

    Question No: 73 – (Topic 6)

    You have an Exchange Server 2013 organization that contains one Client Access server named EX1 and one Mailbox server named EX2.

    You have a perimeter network and an internal network. The perimeter network contains an Edge Transport server named EX3 that has Exchange Server 2010 installed.

    You need to ensure that all of the email messages sent to and received from the Internet are routed through the EX3. Which three actions should you perform? (Each correct answer presents part of the solution. Choose three.)

    1. Allow SMTP traffic between EX3 and EX2.

    2. Create an Edge Subscription.

    3. Allow traffic over TCP 50636 from EX1 to EX3.

    4. Allow SMTP traffic between EX3 and EX1.

    5. Allow traffic over TCP 50636 from EX2 to EX3.

    6. Modify the default Receive connector on EX2.

    Answer: A,B,E Explanation:

    To establish Internet mail through an Edge Transport server, subscribe the Edge Transport server to an Active Directory site. This automatically creates the two Send connectors required for Internet mail flow:

    -> A Send connector configured to send outbound email to all Internet domains.

    -> A Send connector configured to send inbound email from the Edge Transport server to an Exchange 2013 Mailbox server.

    SMTP traffic and ports TCP 50636 must be allowed between the mailbox server (routing service) and the Edge server.

    Dumps4Cert 2018 PDF and VCE

    Dumps4Cert 2018 PDF and VCE

    Question No: 74 HOTSPOT – (Topic 6)

    You run the Get-ExchangeCertificate -Server Ex2 | fl and you receive the following output.

    Use the drop-down area to select the appropriate answers.

    Dumps4Cert 2018 PDF and VCE

    Answer:

    Dumps4Cert 2018 PDF and VCE

    Question No: 75 HOTSPOT – (Topic 6)

    Dumps4Cert 2018 PDF and VCE

    You have an Exchange Server organization that contains the servers configured as shown in the following table.

    Dumps4Cert 2018 PDF and VCE

    You need to configure the namespace to ensure that users can connect to Outlook Web Access from the Internet if a single site is unavailable.

    What command should you run on EX1 and EX2? To answer, select the appropriate options in the answer area.

    Dumps4Cert 2018 PDF and VCE

    Dumps4Cert 2018 PDF and VCE

    Dumps4Cert 2018 PDF and VCE

    Explanation:

    Dumps4Cert 2018 PDF and VCE

    Set-OWAVirtualDirectory -FailbackURL

    Question No: 76 – (Topic 6)

    You plan to deploy 20 Client Access servers that will have Exchange Server 2013 installed.

    You need to prepare the certificate required for the planned deployment. The solution must ensure that the same certificate can be used on all of the Client Access servers.

    What should you do first?

    1. From the Exchange Admin Center, create a new certificate request.

    2. On each Client Access server, start the Certificates console and run the Certificate Import Wizard.

    3. On all of the Client Access servers, delete the default self-signed certificates.

    4. On one of the Client Access servers, run the Remove-ExchangeCertificate cmdlet.

    Answer: A Explanation:

    issuers.

    Note:

    To prevent clients from receiving errors regarding untrusted certificates, the certificate that#39;s used by your Exchange server must be issued by someone that the client trusts. Although most clients can be configured to trust any certificate or certificate issuer, it#39;s simpler to use a trusted third-party certificate on your Exchange server. This is because most clients already trust their root certificates. There are several third-party certificate issuers that offer certificates configured specifically for Exchange.

    Question No: 77 – (Topic 6)

    You have a hybrid deployment of Exchange Server 2013 and Microsoft Office 365. The network does not have Active Directory Federation Services (AD FS) 2.0 installed.

    A user named User1 reports that he cannot access his mailbox because his account is locked out.

    You verify that the mailbox of User1 is hosted on Office 365. You need to unlock the account of User1.

    Which cmdlet should you run?

    1. Set-MailUser

    2. Set-MSolUser

    3. Set-Mailbox

    4. Set-ADUser

    Answer: B Explanation:

    Applies To: Office 365, Windows Azure, Windows Intune

    The Set-MsolUser cmdlet is used to update a user object.

    Parameters include:

    -BlockCredential lt;Booleangt;

    When true, the user will not be able to sign in using their user ID.

    Incorrect:

    Not C: Set-Mailbox

    Use the Set-Mailbox cmdlet to modify the settings of an existing mailbox. Applies to: Exchange Server 2013, Exchange Online

    Question No: 78 DRAG DROP – (Topic 6)

    You have an Exchange Server organization named adatum.com. The organization contains servers that have Exchange Server 2010 and Exchange Server 2013 installed.

    The company executives require that all email messages remain stored for three years.

    You create two retention tags named Ret1 and Ret2. Ret1 moves the email messages to an Archive mailbox after one year. Ret2 permanently deletes the email messages after three years.

    You need to meet the company executives#39; requirements. The solution must ensure that all email messages that are older than two years are removed as quickly as possible.

    Which three actions should you perform in sequence? (To answer, move the appropriate three actions from the list of actions to the answer area and arrange them in the correct order.)

    Dumps4Cert 2018 PDF and VCE

    Answer:

    Dumps4Cert 2018 PDF and VCE

    Question No: 79 – (Topic 6)

    You have an Exchange Server 2013 organization that contains the servers configured as shown in the following table.

    Dumps4Cert 2018 PDF and VCE

    availability group (DAG) named DAG1. Each server has a copy of all the mailbox databases. DAG1 is configured to have a cluster administrative access point. The file share witness is located in Site A.

    EX5 fails and is taken offline permanently.

    You need to identify the maximum number of Mailbox servers that can fail simultaneously without affecting the mailbox access of the users.

    How many servers should you identify?

    1. 2

    2. 3

    3. 4

    4. 5

    Answer: A

    Question No: 80 – (Topic 6)

    You plan to deploy 20 Client Access servers that will have Exchange Server 2013 installed.

    You need to prepare the certificate required for the planned deployment. The solution must ensure that the same certificate can be used on all of the Client Access servers.

    What should you do first?

    1. On one of the Client Access servers, run the New-ExchangeCertificate cmdlet and specify the PrivateKeyExportable parameter.

    2. On all of the Client Access servers, run the Get-ExchangeCertificate cmdlet.

    3. On one of the Client Access servers, run the New-ExchangeCertificate cmdlet and specify the BinaryEncoding parameter.

    4. On one of the Client Access servers, start the Certificates console and run the Certificate Import Wizard.

    Answer: A Explanation:

    Dumps4Cert 2018 PDF and VCE

    Note:

    Use the New-ExchangeCertificate cmdlet to create a self-signed certificate, renew an existing self-signed certificate, or generate a new certificate request for obtaining a certificate from a certification authority (CA).

    100% Dumps4cert Free Download!
    70-765 PDF
    100% Dumps4cert Pass Guaranteed!
    70-765 Dumps

    Dumps4cert ExamCollection Testking
    Lowest Price Guarantee Yes No No
    Up-to-Dated Yes No No
    Real Questions Yes No No
    Explanation Yes No No
    PDF VCE Yes No No
    Free VCE Simulator Yes No No
    Instant Download Yes No No