Dumps4cert.com : Latest Dumps with PDF and VCE Files
2018 Aug Microsoft Official New Released 70-742
100% Free Download! 100% Pass Guaranteed!

Advanced Solutions of Microsoft Exchange Server 2013

Question No: 131 – (Topic 6)

You have a hybrid deployment of Exchange Server 2013 and Office 365.

The mail flow between Office 365 and the on-premises Exchange Server environment is routed through an Exchange Server 2010 Edge Transport server.

Your company is assigned a new set of public IP addresses.

A network administrator updates the external firewall address and all of the associated DNS records.

Office 365 users report that they cannot receive email messages from on-premises users.

You discover that outgoing email messages to Office 365 are in the Office 365 SMTP queue on an Edge server.

You need to ensure that the on-premises users can send email messages successfully to the Office 365 users.

Which tool should you use?

  1. The Exchange Management Console

  2. The Exchange Control Panel in Office 365

  3. The Exchange Admin Center

  4. The Exchange Remote Connectivity Analyzer

Answer: C Explanation: Note:

  • The section describes the user interface elements that are common across the EAC (Exchange Admin Center).

  • Dumps4Cert 2018 PDF and VCE

    Dumps4Cert 2018 PDF and VCE

    * Check the mail flow setting.

    Reference: Managing Directory Based Edge Blocking (DBEB) feature in Exchange Online Protection (EOP)

    Question No: 132 HOTSPOT – (Topic 6)

    You have an organization that has Exchange Server 2010 and Exchange Server 2013 deployed.

    Half of the mailboxes are on Exchange Server 2010 servers and the other half are on Exchange Server 2013 servers.

    You plan to implement Kerberos authentication for all mailbox access.

    You need to identify which Service Principal Names (SPNs) to associate with each version of Exchange Server.

    In the table below identify which SPNs to associate with each Exchange Server version. NOTE: Make only one selection in each row.

    Dumps4Cert 2018 PDF and VCE

    Answer:

    Dumps4Cert 2018 PDF and VCE

    Question No: 133 – (Topic 6)

    You have an Exchange Server 2013 organization. A user is involved in a possible litigation matter.

    You need to protect all of the messages in a mailbox from permanent deletion. Which cmdlet should you use?

    1. Enable-InboxRule

    2. Add-MailboxPermisssion

    3. Set-Mailbox

    4. Set-Retention Policy

    Answer: C

    This example configures April Stewart#39;s mailbox to retain deleted items for 30 days. Set-Mailbox -Identity – quot;April Stewartquot; -RetainDeletedItemsFor 30

    Note: When a user deletes items from the Deleted Items default folder by using the Delete, Shift Delete, or Empty Deleted Items Folder actions, the items are moved to the Recoverable Items\Deletions folder. The duration that deleted items remain in this folder is based on the deleted item retention settings configured for the mailbox database or the mailbox.

    Incorrect:

    Not D: The Set-Retention Policy is used in a cloud environment only.

    Reference: Configure Deleted Item retention and Recoverable Items quotas https://technet.microsoft.com/en-us/library/ee364752(v=exchg.150).aspx

    Question No: 134 HOTSPOT – (Topic 6)

    Your company implements Exchange Server 2013 Unified Messaging (UM). The company uses an auto attendant.

    You need to ensure that when calls are routed to the auto attendant, callers can press 0 to reach a receptionist.

    Which option should you configure from the UM Auto Attendant window? To answer, select the appropriate option in the answer area.

    Dumps4Cert 2018 PDF and VCE

    Answer:

    Dumps4Cert 2018 PDF and VCE

    Explanation:

    Dumps4Cert 2018 PDF and VCE

    Dumps4Cert 2018 PDF and VCE

    Note:

    • Address Book and Operator Access

      Specify how callers to this UM auto attendant can dial and search for users in the shared address book, and if they can transfer to the operator.

      Question No: 135 HOTSPOT – (Topic 6)

      You have an Exchange Server 2013 organization and a Microsoft SharePoint Server 2013 server farm.

      You plan to use a SharePoint eDiscovery Center.

      You need to recommend which component must be deployed before you can use the SharePoint eDiscovery Center for In-Place eDiscovery.

      What should you recommend? To answer, select the appropriate options in the answer area.

      Dumps4Cert 2018 PDF and VCE

      Answer:

      Dumps4Cert 2018 PDF and VCE

      Explanation:

      Target 1: Exchange Web Service (EWS) Managed API Target 2: SharePoint front-end web servers

      Ensure that the Exchange Web Service managed API is installed on every front-end server that is running SharePoint Server 2013.

      Question No: 136 – (Topic 6)

      You have an Exchange Server 2013 organization.

      You successfully migrate the public folders from a previous version of Exchange Server. You discover that one of the public folder mailboxes almost reached its quota size.

      You need to move some of the public folders in the public folder mailbox to another public folder mailbox.

      What should you run?

      1. Set-MailPublicFolder

      2. New-PublicFolderMigrationRequest

      3. New-PublicFolderMoveRequest

      Answer: D Explanation:

    • If the content of a public folder mailbox begins to exceed your mailbox quotas, you may need to move public folders to a different public folder mailbox. There are a couple ways to do this. To move one or more public folders that don’t contain subfolders, you can use the PublicFolderMoveRequest cmdlets.

    • Use the New-PublicFolderMoveRequest cmdlet to begin the process of moving public folder contents between public folder mailboxes. Moving public folders only moves the physical contents of the public folder; it doesn#39;t change the logical hierarchy. When the move request is completed, you must run the Remove-PublicFolderMoveRequest cmdlet to remove the request or wait until the time specified in the CompletedRequestAgeLimit parameter has passed. The request must be removed before you can run another move request.

    Question No: 137 HOTSPOT – (Topic 6)

    You have an Exchange Server 2013 organization that contains the servers configured as shown in the following table.

    Dumps4Cert 2018 PDF and VCE

    All of the Exchange servers run Windows Server 2012 R2 and are members of a database availability group (DAG) named DAG1.

    A mailbox database named DB1 replicates between EX1, EX2, EX3, and EX7. The mailbox

    You need to ensure that if the number of healthy database copies of DB1 is less than three during a 24-hour period, the logs in the lagged database replay automatically.

    What command should you run? To answer, select the appropriate options in the answer area.

    Dumps4Cert 2018 PDF and VCE

    Answer:

    Dumps4Cert 2018 PDF and VCE

    Explanation:

    Dumps4Cert 2018 PDF and VCE

    Lagged copy play down behavior is disabled by default, and can be enabled by running the following command.

    Set-DatabaseAvailabilityGroup lt;DAGNamegt; -ReplayLagManagerEnabled $true After being enabled, play down occurs when there are fewer than 3 copies.

    Lagged copies can now care for themselves by invoking automatic log replay to play down the log files in certain scenarios:

    • When there are fewer than three available healthy copies (active or passive) for more than 24 hours

      Dumps4Cert 2018 PDF and VCE

    • When a low disk space threshold is reached

    • When the lagged copy has physical corruption and needs to be page patched

    Question No: 138 DRAG DROP – (Topic 6)

    You have an Exchange Server 2013 organization that has a hybrid deployment with Microsoft Office 365.

    You use Microsoft Azure Active Directory Sync (Azure AD Sync) for password synchronization.

    You need to configure Azure AD Sync to meet the following requirements:

    -> Azure AD Sync must be forced to replicate every hour.

    -> Only objects in an organizational unit (OU) named Sales must be synced with Office 365.

    -> The Office 365 user account in Azure AD Sync must be updated to user1@fabrikam.onmicrosoft.com.

    Which solution should you include for each requirement? To answer, drag the appropriate solution to the correct requirement. Each solution may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

    Dumps4Cert 2018 PDF and VCE

    Answer:

    Dumps4Cert 2018 PDF and VCE

    Box 1: Windows Azure Active Directory connector

    Box 2: A modified Microsoft.Online.DirSync.Scheduler.exe config file Box 3: Windows Azure Active Directory connector

    Windows Azure Active Directory connector

    * Windows Azure Active Directory connector

    Right click SourceAD or Active Directory Connector Click Properties

    Select Configure Directory Partitions Click the Containers… button

    Select the OUs that you want to synchronize with Office 365.

    * A modified Microsoft.Online.DirSync.Scheduler.exe config file

    The default dirsync period between On-premise and Office 365 is 3 hours. This for many people is too long, especially if you are testing.

    If you wanted to change the default sync period then firstly navigate to the Windows Azure Active Directory Sync directory on the member server where the Directory Sync tool is installed. Older version (i.e. pre Azure) the directory will be called Microsoft Online Directory Sync.

    In this folder open up the file Microsoft.Online.DirSync.Scheduler.exe.config file. Adjust the setting lt;add key=鈥漇yncTimeInterval鈥?value=鈥?:0:0 /gt;

    For example if you wanted to bring this down to 1 hour then change this line to the following. lt;add key=鈥漇yncTimeInterval鈥?value=鈥?:0:0 /gt;

    * Windows Azure Active Directory connector

    Question No: 139 HOTSPOT – (Topic 6)

    You have an Exchange Server 2013 organization.

    All users access their mailbox by using Outlook Web Access. Users can view .xml files from Outlook Web Access.

    Audit the mailbox for a specific user.

    Email the mailbox audit log to a compliance officer.

    Which cmdlet should you use? To answer, select the appropriate options in the answer area.

    Dumps4Cert 2018 PDF and VCE

    Answer:

    Dumps4Cert 2018 PDF and VCE

    Explanation:

    Dumps4Cert 2018 PDF and VCE

    Dumps4Cert 2018 PDF and VCE

    * Set-Mailbox

    Enabling and Configuring Mailbox Auditing

    Mailbox auditing isn#39;t enabled by default, so the first thing you need to do is enable auditing for the mailboxes for which you need to collect data. You need to use the Set-Mailbox cmdlet. For example, this command enables auditing for the mailbox named CEO Mailbox:

    Set-Mailbox -Identity #39;CEO Mailbox#39; -AuditEnabled $True

    * New-MailboxAuditLogSearch

    Getting Auditing Data for Heavily Loaded Servers

    It#39;s easy to retrieve auditing data for lightly loaded servers, but it can be quite a different matter for heavily loaded servers, where auditing is enabled on many mailboxes. Exchange provides the New-MailboxAuditLogSearch cmdlet for this purpose.

    Running New-MailboxAuditLogSearch forces Exchange to execute a background search and return the results in the form of an XML-formatted attachment that#39;s emailed to the specified recipients. Take, for example, the following command:

    New-Mailbox-AuditLogSearch `

    -Name quot;Check for Delegated Sendsquot; `

    -LogonTypes Delegate `

    -StartDate #39;1/1/2012#39; -EndDate #39;2/1/2012#39; `

    -StatusMailRecipients Tony.Redmond@contoso.com

    Dumps4Cert 2018 PDF and VCE

    Question No: 140 HOTSPOT – (Topic 6)

    You company has two offices. The offices are located in Los Angeles and New York. You manage an Exchange Server 2013 organization.

    A database availability group (DAG) named DAG1 contains servers from the Los Angeles office and servers from the New York office. There are copies of all the databases on all of the servers. The New York office is the primary data center and hosts all of the active database copies. As well as the witness server.

    You run the Get-DatabaseAvailabilityGroup command and you receive the following output.

    Dumps4Cert 2018 PDF and VCE

    Select the correct option of below answer area now.

    Dumps4Cert 2018 PDF and VCE

    Answer:

    Dumps4Cert 2018 PDF and VCE

    Dumps4Cert 2018 PDF and VCE

    100% Dumps4cert Free Download!
    70-742 PDF
    100% Dumps4cert Pass Guaranteed!
    70-742 Dumps

    Dumps4cert ExamCollection Testking
    Lowest Price Guarantee Yes No No
    Up-to-Dated Yes No No
    Real Questions Yes No No
    Explanation Yes No No
    PDF VCE Yes No No
    Free VCE Simulator Yes No No
    Instant Download Yes No No