Dumps4cert.com : Latest Dumps with PDF and VCE Files
2017 Nov Cisco Official New Released 640-875
100% Free Download! 100% Pass Guaranteed!
http://www.Dumps4cert.com/640-875.html

Building Cisco Service Provider Next-Generation Networks, Part 1 (SPNGN1)

Question No: 51 – (Topic 5)

Refer to the exhibit.

Dumps4Cert 2017 PDF and VCE

Which two statements about these partial Cisco IOS/IOS-XE configurations are true? (Choose two.)

  1. 10.1.1.2 is the inside local address.

  2. 192.168.1.2 is the outside local address.

  3. 192.168.1.2 is the outside global address.

  4. This is an example of static one-to-one Network Address Translation.

  5. This is an example of static Port Address Translation.

Answer: A,D

Question No: 52 – (Topic 5)

A network administrator issues the who command on a Cisco router, which takes longer than usual to display the results. Which two commands can be used to speed up the process? (Choose two.)

  1. nslookup

  2. no ip-domain lookup

  3. ip name-server

  4. ipconfig /all

  5. ifconfig

Answer: B,C

Question No: 53 DRAG DROP – (Topic 5)

Dumps4Cert 2017 PDF and VCE

Answer:

Dumps4Cert 2017 PDF and VCE

Question No: 54 – (Topic 5)

With IPv6, for which purpose are router solicitation and router advertisement used?

  1. Routing protocol updates

  2. Routing protocol neighbor peerings

  3. Router and prefix discovery

  4. Layer 3 to Layer 2 address resolution (similar to IPv4 ARP)

Answer: C

Question No: 55 – (Topic 5)

Refer to the exhibit.

Dumps4Cert 2017 PDF and VCE

Which configuration is necessary to support this output?

  1. interface Ethernet0ip address 192.168.3.1 255.255.255.0ip nat outside!interface Ethernet1ip address 192.168.4.1 255.255.255.0ip nat outside!interface Serial0ip address 172.17.38.1 255.255.255.0ip nat inside!ip nat inside source list 1 interface Serial0 overload!access-list 1 permit 192.168.3.0 0.0.0.255access-list 1 permit 192.168.4.0 0.0.0.255

  2. interface Ethernet0ip address 192.168.3.1 255.255.255.0ip nat inside!interface Ethernet1ip address 192.168.4.1 255.255.255.0ip nat inside!interface Serial0ip address 172.17.38.1 255.255.255.0ip nat outside!ip nat inside source list 1 interface Serial0 overload!access-list 1 permit 172.17.38.0 0.0.0.255

  3. interface Ethernet0ip address 192.168.3.1 255.255.255.0ip nat inside!interface Ethernet1ip address 192.168.4.1 255.255.255.0ip nat inside!interface Serial0ip address 172.17.38.1 255.255.255.0ip nat outside!ip nat inside source list 1 static 172.17.38.1!access-list 1 permit 192.168.3.0 0.0.0.255access-list 1 permit 192.168.4.0 0.0.0.255

  4. interface Ethernet0ip address 192.168.3.1 255.255.255.0ip nat inside!interface Ethernet1ip address 192.168.4.1 255.255.255.0ip nat inside!interface Serial0ip address 172.17.38.1 255.255.255.0ip nat outside!ip nat inside source list 1 interface Serial0 overload!access-list 1 permit 192.168.3.0 0.0.0.255access-list 1 permit 192.168.4.0 0.0.0.255

Answer: D

Topic 6, Cisco Operating Systems and Platforms

Question No: 56 – (Topic 6)

Which Cisco IOS XR CLI command displays the running state of each line card (including the fan tray) on the Cisco ASR 9000 Series Router?

  1. RP/0/RSP0/CPU0:PE1#show platform

  2. RP/0/RSP0/CPU0:PE1(admin)#show platform

  3. RP/0/RSP0/CPU0:PE1#show hw-module fpd location all

  4. RP/0/RSP0/CPU0:PE1(admin)#show hw-module fpd location all

  5. RP/0/RSP0/CPU0:PE1#show version

  6. RP/0/RSP0/CPU0:PE1(admin)#show version

Answer: B

Question No: 57 – (Topic 6)

Which Cisco IOS XR CLI command can you use to determine if the firmware on any of the line cards on the Cisco ASR 9000 Series Router needs to be upgraded?

  1. RP/0/RSP0/CPU0:PE1#show platform

  2. RP/0/RSP0/CPU0:PE1(admin)#show platform

  3. RP/0/RSP0/CPU0:PE1#show hw-module fpd location all

  4. RP/0/RSP0/CPU0:PE1#show version

  5. RP/0/RSP0/CPU0:PE1(admin)#show version

  6. RP/0/RSP0/CPU0:PE1#show install active

Answer: C

Question No: 58 DRAG DROP – (Topic 6)

Dumps4Cert 2017 PDF and VCE

Answer:

Dumps4Cert 2017 PDF and VCE

Question No: 59 – (Topic 6)

You need to enable the quot;local-routerquot; serial 0/0 connection to the quot;remote-routerquot; to be authenticated using the quot;C!sco!23quot; password. The password cannot be sent in cleartext between the two routers. The quot;remote-routerquot; has already been configured with all the required configurations. Which four Cisco IOS configurations are necessary? (Choose four.)

  1. hostname local-router

  2. int s0/0encap hdlc

  3. int s0/0encap ppp

  4. int s0/0ppp authentication pap

  5. int s0/0ppp authentication chap

  6. ip domain-name test.com

  7. username remote-router password C!sco!23

  8. username local-router password C!sco!23

Answer: A,C,E,G

Question No: 60 – (Topic 6)

In Cisco IOS XR, which three operations is Admin mode used for? (Choose three.)

  1. Secure Domain Router management

  2. Configuration-register settings

  3. Hostname configuration

  4. IOS XR software package upgrades

  5. Interface duplex settings

  6. Domain-name configuration

Answer: A,B,D

100% Dumps4cert Free Download!
Download Free Demo:640-875 Demo PDF
100% Dumps4cert Free Guaranteed!
Download 2017 Dumps4cert 640-875 Full Exam PDF and VCE

Dumps4cert ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2017 Dumps4cert IT Certification PDF and VCE