Networking with Windows Server 2016
Question No: 11
You have servers named Server1 and DHCP1. Both servers run Windows Server 2016. DHCP1 contains an IPv4 scope named Scope1.
You have 1,000 client computers.
You need to configure Server1 to lease IP addresses for Scope1. The solution must ensure that Server1 is used to respond to up to 30 percent of the DHCP client requests only.
You install the DHCP Server server role on Server1. What should you do next?
From the DHCP console, run the Configure Failover wizard.
From Server Manager, install the Network Load Balancing feature.
From Server Manager, install the Failover Clustering feature.
From the DHCP console, create a superscope.
Answer: A Explanation:
Question No: 12
Your company has two main offices. The offices are located in London and Seattle. All servers run Windows Server 2016.
In the Seattle office, you have a Distributed File System (DFS) server named FS1. FS1 has a folder named Folder1 that contains large Windows image files.
In the London office, you deploy a DFS server named FS2, and you then replicate Folder1 to FS2.
After several days, you discover that the replication of certain files failed to complete. You need to ensure that all of the files in Folder1 can replicate to FS2.
What should you do?
Modify the disk quota of the drive that contains Folder1.
From a command prompt, run dfsutil /purgemupcache.
Create a quota for Folder1 by using File Server Resource Manager (FSRM).
Modify the size of staging area of Folder1.
Answer: C Explanation:
Question No: 13
Your network contains multiple wireless access points (WAPs) that use WPA2-Personal authentication. The network contains an enterprise root certification authority (CA).
The security administrator at your company plans to implement WPA2-Enterprise authentication on the WAPs.
To support the authentication change, you deploy a server that has Network Policy Server (NPS) installed.
You need to configure NPS to authenticate the wireless clients.
What should you do on the NPS server?
Add RADIUS clients and configure network policies.
Create a remote RADIUS server group and configure connection request policies.
Create a remote RADIUS server group and install a server certificate.
Add RADIUS clients and configure connection request policies.
Answer: A Explanation:
Question No: 14
You have a server named Server1 that runs Windows Server 2016. Server1 is located on the perimeter network, and only inbound TCP port 443 is allowed to connect Server1 from the Internet.
You install the Remote Access server role on Server1.
You need to configure Server1 to accept VPN connections over port 443. Which VPN protocol should you use?
Answer: B Explanation:
Question No: 15
Your company has 5,000 users who work remotely.
You have 40 VPN servers that host the remote connections for the users. You plan to deploy a RADIUS solution that contains five RADIUS servers.
You need to ensure that client authentication requests are distributed evenly between the five RADIUS servers.
What should you do?
Install the Network Load Balancing role service on all of the RADIUS server. Configure all of the RADIUS clients to connect to a virtual IP address.
Deploy RAS Gateway to a new server. Configure all of the RADIUS clients to connect to RAS Gateway.
Install the Failover Clustering role service on all of the RADIUS servers. Configure all of the RADIUS clients to connect to the IP address of the cluster.
Deploy a RADIUS proxy to a new server. Configure all of the RADIUS clients to connect to the RADIUS proxy.
Answer: D Explanation:
Question No: 16
You have a server that is configured as a hosted BranchCache server.
You discover that a Service Connection Point (SCP) is missing for the BranchCache server.
What should you run to register the SCP?
Answer: D Explanation:
Question No: 17 HOTSPOT
Your network contains an Active Directory domain named contoso.com. The domain contains a domain-based Distributed File System (DFS) namespace named Namespace1. Namespace1 has the following configuration.
Namespace1 has a folder named Folder1.
Folder1 has the targets shown in the following table.
You have the site links shown in the following table.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
Question No: 18 HOTSPOT
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2016.
Server1 has Microsoft System Center 2016 Virtual Machine Manager (VMM) installed. Server2 has IP Address Management (IPAM) installed.
You create a domain user named User1.
You need to integrate IPAM and VMM. VMM must use the account of User1 to manage IPAM. The solution must use the principle of least privilege.
What should you do on each server? To answer, select the appropriate options in the answer area.
On Server1: Create a Run As Account that uses User1. On Server2: Add User1 to IPAM ASM Administrator Role.
Question No: 19
You company has a main office in London. The company has 1,000 users who are located in many countries.
You plan to deploy a large remote access solution for the company.
The London office has three servers named Server1, Server2, and Server3 that run Windows Server 2016.
You plan to use Server1 as a VPN server, Server2 as a RADIUS proxy, and Server3 as a RADIUS server.
You need to configure Server2 to support the planned deployment.
Which three actions should you perform on Server2? Each correct answer presents part of the solution.
Create a connection request policy.
Deploy a Windows container.
Add a RADIUS client.
Create a network policy.
Create a remote RADIUS server group.
Answer: A,C,E Explanation:
Question No: 20 DRAG DROP
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2016.
You install IP Address Management (IPAM) on Server1.
You need to manually start discovery of the servers that IPAM can manage in contoso.com.
Which three cmdlets should you run in sequence? To answer, move the appropriate cmdlets from the list of cmdlets to the answer area and arrange them in the correct order.
https://technet.microsoft.com/itpro/powershell/windows/ipam/add-ipamdiscoverydomain https://technet.microsoft.com/itpro/powershell/windows/ipam/add-ipamserverinventory https://technet.microsoft.com/itpro/powershell/windows/ipam/invoke-ipamserverprovisioning
100% Free Download!
Download Free Demo:70-741 Demo PDF
100% Pass Guaranteed!
Download 2017 EnsurePass 70-741 Full Exam PDF and VCE
Get 10% off your purchase! Copy it:TJDN-947R-9CCD [2017.07.01-2017.07.31]
|Lowest Price Guarantee||Yes||No||No|
|Free VCE Simulator||Yes||No||No|