Ensurepass

 

QUESTION 331

Drag and Drop Question

You have a Hyper-V host named Server1. Server1 hosts a virtual machine named VM1. You view the properties of VM1 as shown in the following exhibit. (Click the Exhibit button.)

 

clip_image001

 

You need to configure bandwidth management for VM1. Which three actions should you perform in sequence? (To answer, move the appropriate three actions from the list of actions to the answer area and arrange them in the correct order.)

 

 

clip_image002

 

Correct Answer:

 

clip_image004

 

 

QUESTION 332

You plan to deploy a file server to a temporary location. The temporary location experiences intermittent power failures. The file server will contain a dedicated volume for shared folders. You need to create a volume for the shared folders. The solution must minimize the likelihood of file corruption if a power failure occurs. Which file system should you use?

 

A.

ReFS

B.

NFS

C.

NTFS

D.

FAT32

 

Correct Answer: A

Explanation:

The ReFS file system allows for resiliency against corruptions with the option to salvage amongst many other key features like Metadata integrity with checksums, Integrity streams with optional user data integrity, and shared storage pools across machines for additional failure tolerance and load balancing, etc.

 

 

 

QUESTION 333

Your company has a main office and four branch offices. The main office contains a server named Server1 that runs Windows Server 2012 R2. The IP configuration of each office is configured as shown in the following table.

clip_image005

 

You need to add a single static route on Server1 to ensure that Server1 can communicate with the hosts on all of the subnets. Which command should you run?

 

A.

route.exe add -p 10.10.0.0 mask 255.255.252.0 10.10.0.1

B.

route.exe add -p 172.16.16.0 mask 255.255.252.0 10.10.0.1

C.

route.exe add -p 10.10.0.0 mask 255.255.252.0 172.16.0.0

D.

route.exe add -p 172.16.18.0 mask 255.255.252.0 10.10.0.1

 

Correct Answer: B

Explanation:

These parameters will allow communication with all the hosts.

 

clip_image006

 

 

 

 

 

 

 

 

 

 

QUESTION 334

You work as a senior administrator at ENSUREPASS.com. The ENSUREPASS.com network consists of a single domain named ENSUREPASS.com. All servers on the ENSUREPASS.com network have Windows Server 2012 R2 installed.

You are running a training exercise for junior administrators. You are currently discussing what happens when you run the Remove-NetLbfoTeam Windows PowerShell cmdlet.

Which of the following describes the results of running this cmdlet?

 

A.

It removes one or more network adapters from a specified NIC team.

B.

It removes a team interface from a NIC team.

C.

It removes a specified NIC team from the host.

D.

It removes a network adapter member from a switch team.

 

Correct Answer: C

Explanation:

Remove-NetLbfoTeam removes the specified NIC team from the host

The Remove-NetLbfoTeam cmdlet removes the specified NIC team from the host. This cmdlet disconnects all associated team members and providers from the team. You can specify the team to remove by using either a team object retrieved by Get-NetLbfoTeam, or by specifying a team name.

You can use Remove-NetLbfoTeam to remove all NIC teams from the server.

You need administrator privileges to use Remove-NetLbfoTeam.

http://technet.microsoft.com/en-us/library/jj130848%28v=wps.620%29.aspx

 

 

QUESTION 335

You work as a senior administrator at ENSUREPASS.com. The ENSUREPASS.com network consists of a single domain named ENSUREPASS.com. All servers in the ENSUREPASS.com domain, including domain controllers, have Windows Server 2012 R2 installed.

You are running a training exercise for junior administrators. You are currently discussing the Virtual Fibre Channel SAN feature.

Which of the following is TRUE with regards to the Virtual Fibre Channel SAN feature? (Choose all that apply.)

 

A.

It prevents virtual machines from connecting directly to Fibre Channel storage.

B.

It allows for virtual machines to connect to Fibre Channel storage directly.

C.

It includes support for virtual SANs, live migration, and multipath I/O.

D.

It includes support for virtual SANs, and live migration, but not multipath I/O.

 

Correct Answer: BC

Explanation:

To gain the full benefits of server virtualization and cloud architectures, virtualized workloads need to connect easily and reliably to existing SANs. For many enterprise organizations, Hyper-V deployments were limited in scale and scope because they

lacked the ability to directly connect VMs to Fibre Channel SAN storage from inside a VM. Hyper-V in Windows Server 2012 R2 now provides virtual Fibre Channel Host Bus Adapter (HBA) ports within the guest operating system that runs the virtual machine, connecting virtual machines directly to FibreChannel SAN Logical Unit Numbers (LUNs).

Virtual Fibre Channel for Hyper-V provides several important advantages for Hyper-V environments:

Simplifies storage connectivity for virtualized workloads to ultra-reliable, high-performance Fibre Channel SAN storage

Enables new solutions that require shared storage, such as failover clustering, live migration, andmultipath I/O

Leverages and protects existing investments in Fibre Channel storage ?

Enables advanced FC SAN storage functionality for VMs

Facilitates migration of FC workloads into the cloud

Enables improved monitoring and troubleshooting, with visibility from the VM to the FC SAN storage

Enables centralized management of Ethernet and FC-based virtualized workloads

Combining Virtual Fibre Channel for Hyper-V and the Brocade?Fibre Channel SAN infrastructure greatly simplifies connectivity between Fibre Channel SAN storage and virtualized applications, enabling enterprise IT and hosting providers to achieve new levels of availability, reliability, and scalability for cloud-based services.

You need your virtualized workloads to connect easily and reliably to your existing storage arrays. Windows Server 2012 R2 provides Fibre Channel ports within the guest operating system, which allows you to connect to Fibre Channel directly from within virtual machines. This feature protects your investments in Fibre Channel, enables you to virtualize workloads that use direct access to Fibre Channel storage, allows you to cluster guest operating systems over Fibre Channel, and provides an important new storage option for servers hosted in your virtualization infrastructure.

With this Hyper-V virtual Fibre Channel feature, you can connect to Fibre Channel storage from within a virtual machine. This allows you to use your existing Fibre Channel investments to support virtualized workloads. Support for Fibre Channel in Hyper-V guests also includes support for many relatedfeatures, such as virtual SANs, live migration, and MPIO.

http://technet.microsoft.com/en-us/library/hh831413.aspx

http://www.brocade.com/downloads/documents/technical_briefs/virtual-fibre-channel-hyperv-tb.pdf

 

 

QUESTION 336

Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2. On a server named Server2, you perform a Server Core Installation of Windows Server 2012 R2.

You join Server2 to the contoso.com domain. You need to ensure that you can manage Server2 by using the Computer Management console on Server1. What should you do on Server2?

 

A.

Install Remote Server Administration Tools (RSAT).

B.

Install Windows Management Framework.

C.

Run sconfig.exe and configure remote management.

D.

Run sconfig.exe and configure Remote Server Administration Tools (RSAT).

 

Correct Answer: C

Explanation:

In Windows Server 2012 R2, you can use the Server Configuration tool (Sconfig.cmd) to configure and manage several common aspects of Server Core installations. You must be a member of the Administrators group to use the tool. Sconfig.cmd is available in the Minimal Server Interface and in Server with a GUI mode.

 

clip_image008

 

 

QUESTION 337

You work as an administrator at ENSUREPASS.com. The ENSUREPASS.com network consists of a single domain named ENSUREPASS.com. All servers in the ENSUREPASS.com domain, including domain controllers, have Windows Server 2012 R2 installed.

When you recently added new workstations to the ENSUREPASS.com manually, you found that that the computer accounts were created in the default container. You want to make sure that the default container for newly created computers is redirected to a specified, target organizational unit (OU).

Which of the following actions should you take?

 

A.

You should consider making use of the replace.exe command-line tool.

B.

You should consider making use of the redircmp.exe command-line tool.

C.

You should consider making use of the redirusr.exe command-line tool.

D.

You should consider making use of the rexec.exe command-line tool.

 

Correct Answer: B

Explanation:

redircmp.exe redirects the default container for newly created computers to a specified, targetorganizational unit (OU) so that newly created computer objects are created in the specific target OU instead of in CN=Computers.

 

clip_image010

 

http://technet.microsoft.com/pt-pt/library/cc770619%28v=ws.10%29.aspx http://support.microsoft.com/kb/324949/en-us

http://support.microsoft.com/kb/555573/en-us

 

 

QUESTION 338

You work as an administrator at ENSUREPASS.com. The ENSUREPASS.com network consists of a single domain named ENSUREPASS.com.

ENSUREPASS.com has a Windows Server 2012 R2 domain controller, named ENSUREPASS-DC01, which has the Domain Naming master and the Schema master roles installed. ENSUREPASS.com also has a Windows Server 2008 R2 domain controller, named ENSUREPASS-DC02, which has the PDC Emulator, RID master, and Infrastructure master roles installed.

 

You have deployed a new Windows Server 2012 server, which belongs to a workgroup, in ENSUREPASS.com’s perimeter network. You then executed the djoin.exe command.

Which of the following is the purpose of the djoin.exe command?

 

A.

It sets up a computer account in a domain and requests an offline domain join when a computer restarts.

B.

It sets up a user account in a domain and requests an online domain join when a computer restarts.

C.

It sets up a computer account in a domain and requests an offline domain join immediately.

D.

It sets up a computer account in a domain and requests an online domain join immediately.

 

Correct Answer: A

Explanation:

To perform an offline domain join, you run commands by using a new tool named Djoin.exe. You use Djoin.exe to provision computer account data into AD DS. You also use it to insert the computer account data into the Windows directory of the destination computer, which is the computer that you want to join to the domain.

/localos Targets the local operating system installation, instead of an offline image, with the domain join information. Because this parameter injects the blob data into the locally running operating system image, you must restart the computer to complete the domain join operation, as you must also do for an onlinedomain join.

 

clip_image012

clip_image013

 

clip_image014

 

http://technet.microsoft.com/en-us/library/offline-domain-join-djoin-step-by-step%28v=ws.10%29.aspx

 

 

QUESTION 339

You work as an administrator at ENSUREPASS.com. The ENSUREPASS.com network consists of a single domain named ENSUREPASS.com. All servers in the ENSUREPASS.com domain have Windows Server 2012 R2 installed, while domain controllers have Windows Server 2008 R2 installed.

You are then tasked with deploying a new Windows Server 2012 R2 domain controller. You are preparing to install the DNS Server role, and enable the global catalog server option.

Which of the following actions should you take?

 

A.

You should consider making use of Server Manager.

B.

You should consider making use of the Active Directory Installation Wizard.

C.

You should consider making use of the DHCP Installation Wizard

D.

You should consider making use of TS Manager

 

Correct Answer: A

Explanation:

 

clip_image015

 

 

clip_image016

 

clip_image017

 

http://kpytko.pl/2012/09/07/adding-first-windows-server-2012-domain-controller-within-windows- 200320082008r2-network/

http://www.msserverpro.com/migrating-active-directory-domain-controller-from-windows-server-2008-r2-to- windows-server-2012/

 

 

 

 

 

QUESTION 340

You work as an administrator at ENSUREPASS.com. The ENSUREPASS.com network consists of a single domain named ENSUREPASS.com. all servers in the ENSUREPASS.com domain has Windows Server 2012 R2 nstalled.

You have logged on to a server, named ENSUREPASS-SR07, and would like to obtain the IP configurations of a server, named ENSUREPASS-SR13.

Which of the following actions should you take?

 

A.

You should consider making use of the Winrs.exe command.

B.

You should consider making use of the Winsat.exe command.

C.

You should consider making use of the Winpop.exe command.

D.

You should consider making use of the Dsrm.exe command.

 

Correct Answer: A

Explanation:

Windows Remote Management allows you to manage and execute programs remotely.

You can use WinRS to administer a Server Core installation remotely from the command line. WinRS is a command-line tool included in both Windows Vista and the Full installation of Windows Server 2008, which relies on Windows Remote Management (WinRM) to execute remote commands, especially for headless servers. WinRM is Microsoft’s implementation of the WS-Management protocol, a standard Simple Object Access Protocol (SOAP)-based, firewall-friendly protocol that enables hardware and operating systems from different vendors to interoperate. You can think of WinRM as the server side and WinRS the client side of WS-Management.

winrs -r:<some computer> ipconfig /all

 

clip_image019

 

http://technet.microsoft.com/en-us/library/dd163506.aspx

Free VCE & PDF File for Microsoft 70-410 Real Exam

Instant Access to Free VCE Files: MCSE|MCSA|MCITP…
Instant Access to Free PDF Files: MCSE|MCSA|MCITP…