Ensurepass

 

QUESTION 291

You have a Hyper-V host named Host1 that connects to a SAN by using a hardware Fibre Channel adapter. Host1 contains two virtual machines named VM1 and VM2. You need to provide VM1 with direct access to the SAN. VM2 must not require access to the SAN. Which two configurations should you perform? (Each correct answer presents part of the solution. Choose two.)

 

A.

On VM1, configure a Fibre Channel adapter.

B.

On Host1, configure a new virtual switch.

C.

On VM1, add a network adapter.

D.

On Host1, configure a new Virtual Fibre Channel SAN.

E.

On Host1, modify the Hyper-V settings.

 

Correct Answer: AD

Explanation:

Step 1:

D: Building a Virtual SAN

The process of setting up virtual Fibre Channel starts with building a virtual SAN. The easiest way to accomplish this is to open the Hyper-V Manager, right click on the listing for your Hyper-V server in the console tree, and then choose the Virtual SAN Manager command from the shortcut menu.

Step 2:

A: Once you have created a virtual SAN, the next step in the process is to link a virtual machine to the virtual SAN. To do so, right click on the virtual machine for which you want to provide Fibre Channel connectivity and select the Settings command from the resulting shortcut menu. Next, select the Add Hardware container, as shown in the figure above, and then select the Fibre Channel Adapter option from the list of available hardware. Etc.

Note:

* Virtual Fibre Channel for Hyper-V (also referred to as Synthetic Fibre Channel) provides VM guest operating systemswith direct access to a Fibre Channel SAN by using a standard World Wide Name (WWN) associated with a virtual machine

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

QUESTION 292

You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the HyperV server role installed. Server1 has 8 GB of RAM. Server1 hosts five virtual machines that run Windows Server 2012 R2. The settings of a virtual machine named Server3 are configured as shown in the exhibit. (Click the Exhibit button.)

 

clip_image001

 

You need to ensure that when Server1 restarts, Server3 automatically resumes without intervention. The solution must prevent data loss. Which settings should you modify?

 

A.

BIOS

B.

Automatic Start Action

C.

Automatic Stop Action

D.

Integration Services

 

Correct Answer: C

Explanation:

http://www.altaro.com/hyper-v/hyper-v-automatic-start-and-stop-action/

 

clip_image003

 

 

QUESTION 293

You have a laptop named Computer1. Computer1 runs Windows 8 Enterprise. Computer1 has a wired network adapter and a wireless network adapter. Computer1 connects to a wireless network named Network1. For testing purposes, you install Windows Server 2012 R2 on Computer1 as a second operating system. You install the drivers for the wireless network adapter. You need to ensure that you can connect to Network1 from Windows Server 2012 R2. What should you do?

 

A.

From a local Group Policy object (GPO), configure the Wireless Network (IEEE 802.11) Policies settings.

B.

From a local Group Policy object (GPO), configure the settings of Windows Connection Manager.

C.

From Server Manager, install the Wireless LAN Service feature.

D.

Restart the WLAN AutoConfig service.

 

Correct Answer: C

Explanation:

http://technet.microsoft.com/en-us/library/hh994698.aspx

The Wireless LAN service is a feature in Windows Server® 2012 R2 that you can use to enable the wireless WLAN AutoConfig service, and to configure the WLAN AutoConfig service for automatic startup. Once enabled, the WLAN AutoConfig service dynamically selects which wireless network the computer automatically connects to, and configures the necessary settings on the wireless network adapter. This includes automatically selecting and connecting to a more preferred wireless network when one becomes available.

To enable the Wireless LAN Service

In Server Manager Dashboard, click Manage, and then click Add Roles and Features. The Add Roles and Features Wizard opens.

Click Next. In Select installation type, select Role-based or feature-based installation, and then click Next.

In Select destination server, enable Select a server from the server pool, and in Server Pool, select the server for which you want to enable the Wireless LAN Service, and then click Next.

In Select server roles, click Next.

In Select Server features, in Features, select Wireless LAN Service, and then click Next.

 

 

QUESTION 294

Your network contains an Active Directory domain named contoso.com. You install Windows Server 2012 on a new server named Server1 and you join Server1 to the domain. You need to ensure that you can view processor usage and memory usage information in Server Manager. What should you do?

 

A.

From Server Manager, click Configure Performance Alerts.

B.

From Server Manager, click Start Performance Counters.

C.

From Performance Monitor, start the System Performance Data Collector Set (DCS).

D.

From Performance Monitor, create a Data Collector Set (DCS).

 

Correct Answer: B

Explanation:

 

clip_image005

 

 

QUESTION 295

Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. The domain contains two domain controllers named DC1 and DC2 that run Windows Server 2012 R2. The domain contains a user named User1 and a global security group named Group1. You need to modify the SAM account name of Group1. Which cmdlet should you run?

 

A.

Add-AdPrincipalGroupMembership

B.

Install AddsDomainControNer

C.

Install WindowsFeature

D.

Install AddsDomain

E.

Rename-AdObject

F.

Set-AdAccountControl

G.

Set-AdGroup

H.

Set-User

 

Correct Answer: E

 

 

QUESTION 296

You have a Hyper-V host named Server1 that runs Windows Server 2012 R2. Server1 hosts a virtual machine named VM1 that runs Windows Server 2012 R2. VM1 has several snapshots. You need to modify the snapshot file location of VM1. What should you do?

 

A.

Right-click VM1, and then click Export…

B.

Shut down VM1, and then modify the settings of VM1.

C.

Delete the existing snapshots, and then modify the settings of VM1.

D.

Pause VM1, and then modify the settings of VM1.

 

Correct Answer: C

Explanation:

http://doquent.wordpress.com/2012/09/02/relocating-a-hyper-v-vm-folder/

 

clip_image006

 

It is not A, watch this: http://www.youtube.com/watch?v=YvwtpPQk0Cs

 

 

QUESTION 297

Hotspot Question

The settings for a virtual machine named VM2 are configured as shown in the VM2 exhibit. (Click the Exhibit button.)

 

clip_image007

 

The settings for Diskl.vhdx are configured as shown in the Diskl.vhdx exhibit. (Click the Exhibit button.)

 

clip_image008

 

The settings for Disk2.vhdx are configured as shown in the Disk2.vhdx exhibit. (Click the Exhibit button.)

clip_image009

 

Select Yes if the statement can be shown to be true based on the available information; otherwise select No. Each correct selection is worth one point.

 

clip_image010

 

Correct Answer:

 

clip_image011

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

QUESTION 298

You have a server named Server1 that runs Windows Server 2012 R2. A network technician installs a new disk on Server1 and creates a new volume. The properties of the new volume are shown in the exhibit. (Click the Exhibit button.)

 

clip_image012

 

You need to ensure that you can enable NTFS disk quotas for volume D. What should you do first?

 

A.

Install the File Server Resource Manager role service.

B.

Format volume D.

C.

Run the convert.exe command.

D.

Convert the disk to a dynamic disk.

 

Correct Answer: B

Explanation:

http://blogs.technet.com/b/askpfeplat/archive/2013/01/02/windows-server-2012-does-refs-replace-ntfs-when-should-i-use-it.aspx

REFS to NTFS requires format not convert.exe

 

 

QUESTION 299

Hotspot Question

Your network contains an Active Directory domain named contoso.com. The domain contains a print server named Print1 that runs Windows Server 2012 R2. Print1 has 50 shared printers. Each printer is listed in Active Directory. From Active Directory Users and Computers, you browse to Print1 and you discover that the 50 printers are not visible. You need to ensure that you can view the printer objects in Active Directory Users and Computers. Which option should you select?To answer, select the appropriate option in the answer area.

 

clip_image013

 

Correct Answer:

 

clip_image014

 

 

QUESTION 300

You have a file server named File1 that runs Windows Server 2012 R2. File1 contains a shared folder named Share1. Share1 contains an Application named SalesApp1.exe. The NTFS permissions for Share1 are shown in the following table.

 

clip_image015

 

The members of L_Sales discover that they cannot add files to Share1. Domain users can run SalesApp1.exe successfully. You need to ensure that the members of L_Sales can add files to Share1.

What should you do?

 

A.

Add the Domain Users group to L_Sales.

B.

Add L_Sales to the Domain Users group.

C.

Edit the Share permissions.

D.

Edit the NTFS permissions.

 

Correct Answer: C

Explanation:

http://www.techrepublic.com/article/windows-101-know-the-basics-about-ntfs-permissions/

The least restrictive permission applies here, so the users from L_sales have read & execute, write… in order to add files they need the NTFS permission called MODIFY.

Based on NTFS permissions:

Modify: Users can view and modify files and file properties, including deleting and adding files to a directory or file properties to a file.

Free VCE & PDF File for Microsoft 70-410 Real Exam

Instant Access to Free VCE Files: MCSE|MCSA|MCITP…
Instant Access to Free PDF Files: MCSE|MCSA|MCITP…